For the Service Technician
Service level
Press the Menu button (Fig. 58), the display shows "Service level"
– Fig. 59.
Confirm "Service level" by pressing the Choose button – Fig. 59.
Press the 5sec . button for longer than 5 seconds – Fig. 60.
Use the arrow buttons to select the "Values" , "Restart temperature"
or "Actuator test" parameters (Fig. 61) and confirm with the Choose
button – Fig. 62.
The menu item or sub-menu item is exited by pressing the Back
button or after a delay of 45 seconds.
Fig. 58
Fig. 59
Fig. 60
Fig. 61
Fig. 62
28
Boiler temperature
42
°C
(Operating phases)
Info
Menu
Service level
Choose
Back
Service level only
for trained
service personnel
5 s
Press for 5
seconds
Values
Restart temperature
Burnout
Language
Actuator test
Choose
Back
Values
Restart temperature
Burnout
Language
Actuator test
Choose
Back