Table of Contents
Advertisement
Using the Document Feeder
The Reversing Automatic Document Feeder (RADF), feeds originals to the Exposure
Glass for copying and if Duplex Copying is selected, it turns your original over for
copying the other side of the original. Then, it exits the original onto the Original Exit
Tray.
• You can place up to 60 letter size originals in the Document Feeder for automatic
Precautions when using Document Feeders
1. Avoid using:
•
Badly wrinkled or folded originals.
•
Clipped or stapled originals.
•
Carbon paper.
•
Torn originals.
•
Taped originals.
•
Damp originals.
2. Folded or curled originals should be smoothed out before inserting into the Document Feeder.
3. Feeding a stack of different width originals through the Document Feeder is not recommended.
•
Feed them through one at a time.
•
You can, however, feed a stack of different length originals through the Document Feeder.
4. If the surface of any two originals are so rough that they cannot be moved when pinched between two
fingertips, the friction between the originals may obstruct paper separation even when the paper
weight is within specifications.
Basic Copier Functions
feeding of your originals to the Exposure Glass for copying.
Using the Document Feeder
3 - 20
Advertisement
Table of Contents
