Setting Originals In The Document Feeder - Lanier 5484 Operator's Manual

B
Set the first page of your original face down on the exposure glass and align
it to the rear left corner.
1
2
1: Reference mark
2: Scale
C
Lower the document feeder.

Setting Originals in the Document Feeder

Note
The last page should be on the bottom.
Do not stack originals beyond the limit mark on the side fence of the docu-
ment feeder.
When copying thin originals (40 – 52 g/m
a time in the document feeder or on the exposure glass to avoid damage due
to multi-sheet feeds (several pages fed together at the same time).
Originals in pencil or other similar media may get slightly smudged after be-
ing scanned through the ARDF. To avoid this, you can set them on the expo-
sure glass instead.
As a rule, one-sided originals are delivered to the ARDF external tray, and
two-sided originals to the ARDF tray.
Reference
For originals that the document feeder can handle, see
To set a stack of originals in the document feeder
A
Adjust the guide to the original size.
ND1C01EE
2
, 11 – 14 lb, Bond), set one page at
Setting Originals
P.15 "Originals".
2
27