Using The Hole Punch - Lanier 5580 Operator's Manual

Using the Hole Punch

With the optional hole punch unit attached to the optional finisher, you can have the copies
punched with holes for binding the document.
• The hole punch punches holes in paper from 17 to 42 lb.
• Special paper such as transparencies are not recommended for hole punching.
• The number of holes is switchable from 2 to 3. Hole size is 8 mm.
1
Place originals face up in the Document Feeder.
2
Touch the BASIC key
3
Touch the FINISHER key.
Using the Finisher
Using the Hole Punch
6 - 9