Using Auto Start - Lanier 5580 Operator's Manual

Using Auto Start

When your copier is first turned ON, it takes seven minutes for it to come to its READY condition.
During this time however, you can set up your copy job, press the START key and walk away. You
can even do this while your copier is in the Energy Saver mode. When the copier comes to its
READY condition, it automatically runs your copy job.
1
Push the Power Switch to the ON position to turn your copier ON.
2
Place your original in the Document Feeder or on the Exposure
Glass.
3
Make your copy requirement selections.
Special Copier Functions

Using Auto Start

5 - 1