Erasing The Edges Of A Copy - Lanier 5580 Operator's Manual

Erasing the Edges of a Copy

This feature is used to eliminate the shadows on the edge of the copy that result from torn or
stained originals. In the Edge Erase mode, a white border is created along all edges of the copy
such as around maps and graphics. You can select a border of 5 to 20 mm.
Example of Edge Erase Copying
Erasing the Edge Around the Copy:
1
Touch the SPECIAL tab.
2
Touch the EDGE ERASE key.
Copying Methods
Erasing the Edges of a Copy
4 - 34