Using Non-Sort Mode
Use Non-Sort copying when you are making copies that require no stacking or collating.
Be sure to use the Non-Sort mode when copying onto special papers such as transparency film or
label stock.
1
Check that NON-SORT NON-STAPLE is selected and displayed on
the FINISHER key.
If COLLATE or STACK is displayed, touch the key and select
NON-SORT NON-STAPLE.
2
Make any additional copy settings.
3
Press the START key.
Your copies exit into Tray 1 of the Finisher.
Using the Finisher
Using Non-Sort Mode
6 - 2