Table of Contents
Advertisement
Control Panel
The surface at the front of the copier containing Keys used to control the operation of the copier. It usually also contains the Touch
Screen that shows the status of the copier or the job in progress.
Copies
The imaged paper output from a copier. It might be a direct reproduction of the input document or it can contain any number of
changes as programmed into the copier such as Enlargement/Reduction, Trim/Mask, etc.
Copies in Progress
This Touch Screen shows how many copies of the total have been made.
Copies Selected
This is the same as Copy Quantity, in that it shows the number of copies requested.
Copy Paper
See: paper
Copy Quantity
This part of a Touch Screen shows the requested number of copies.
Copy Size Keys
Keys used to input the desired size of the copy.
Darker Copies
This term refers to the amount of toner placed on the copy through the imaging process. The amount of toner is controlled by the
"darkness" of the original and the amount of light used during the exposure process; more light means less toner or image density.
Developer Material
This is a supply used in the copier. It usually consists of two parts; a carrier material and the toner. The developer material is only
used by a technician when installing a new unit or when cleaning a Developer Unit.
Developer Unit
An assembly located near the drum inside the copier that delivers the toner to the drum. It allow the correct amount of toner to be
Glossary
Copier Terms
G - 2
Advertisement
Table of Contents
