Interrupt Copying - Lanier 5580 Operator's Manual

Interrupt Copying

You can interrupt a copy job that is in progress to make a quick copy of another original, without
disrupting the original copy job settings or copy count. You do this by using the Interrupt feature.
1
Press the INTERRUPT key.
2
When the copier stops:
•
Remove your remaining originals from the Document Feeder.
•
Position the new original on the Exposure Glass.
3
Enter the Access Code if prompted from the Touch Screen.
4
Make any additional copy settings.
5
Press the START key.
Copying Methods

Interrupt Copying

4 - 19