Placing Originals In The Auto Document Feeder - Lanier LD 035 Operator's Manual

AdonisC3_GBcopyF_FM1.book Page 12 Thursday, November 28, 2002 1:53 PM
Placing Originals
Placing Originals in the Auto
Document Feeder
1
Settings should be made in the fol-
lowing situations:
❖ ❖ ❖ ❖ When placing originals one by one:
p.13 "SADF mode"
❖ ❖ ❖ ❖ When placing originals consisting of
more than 80 pages:
p.12 "Batch mode"
❖ ❖ ❖ ❖ When copying originals of various
sizes:
p.13 "Mixed Size mode"
❖ ❖ ❖ ❖ When placing custom size originals:
p.14 "Placing custom size origi-
nals"
Note
❒ Do not stack originals beyond the
limit mark on the side fence of the
ADF.
❒ The last page should be on the bot-
tom.
❒ Do not place objects on the sensors
or cover them with your hands.
This could cause the size to be de-
tected incorrectly. Also, do not
place anything on the exposure
glass cover as this could cause a
malfunction.
1.
Sensors
12
A A A A
Set the document guide to the
original size.
B B B B
Align the edges of the original
and place it on the ADF with the
side to be copied facing up.
1.
Limit mark
2.
Document guide
Note
❒ Straighten curls in the original
before placing it on the ADF.
❒ To prevent multiple sheets from
being fed at once, fan the origi-
nal before placing it on the ADF.
❒ Set the original squarely.
Batch mode
In Batch mode, the machine copies an
original including more than 80 pages
as one document, even if it is placed
on the ADF in parts.
A A A A
Press [Special Original].
ZGHS060E