Table of Contents
Advertisement
Document Feeder
Document Feeder
The Reversing Automatic Document Feeder (RADF), feeds originals to the Exposure Glass for
copying and it turns the original over for copying the other side of the original. Then, it exits the
original onto the Document Tray.
Precautions when using Document Feeders
1. Avoid using:
2. Avoid covering the two sensors on the doc-
ument feeder tray. These sensors detect the
original size and could cause the original
size to not be properly detected.
3 - 2
•
You can place up to 50 originals in the Document Feeder for automatic feeding of
originals to the Exposure Glass for copying.
•
You may also select a feature which allows you to feed one original at a time into the
Document Feeder without having to press the Start key each time.
•
Badly wrinkled or folded originals
•
Clipped or stapled originals
•
Carbon paper
•
Torn originals
•
Taped originals
•
Damp originals
1. Folded or curled originals should be smoothed out before inserting into
the Document Feeder.
2. Feeding a stack of different width originals through the Document
Feeder is not recommended. Feed them through one at a time. You can,
however, feed a stack of different length originals through the
Document Feeder.
3. If the surface of any two originals are so rough that they cannot be
moved when pinched between two fingertips, the friction between the
originals may obstruct paper separation even when the paper weight is
within specifications.
Copier Functions
Advertisement
Table of Contents
