Lanier 5515 Operator's Manual
  1. Manuals
  2. Brands
  3. Lanier Manuals
  4. Copier
  5. 5515
  6. Operator's manual

Lanier 5515 Operator's Manual

Lanier digital color copier/printer operator guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

Operator Guide
5515/5518
5515/5518
5515/5518
5515/5518
Digital Copier
you r docu ment m an a ge m ent pa r tne r

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5515 and is the answer not in the manual?

Questions and answers

Related Manuals for Lanier 5515

Summary of Contents for Lanier 5515

  • Page 1 Operator Guide 5515/5518 5515/5518 5515/5518 5515/5518 Digital Copier you r docu ment m an a ge m ent pa r tne r...
  • Page 2 To request service, call: ( Customer Vision® - Our commitment to your complete satisfaction As an Energy Star Partner, Lanier Worldwide, Inc. has determined that this product meets the Energy Star guidelines for energy efficiency. © 2001 Lanier Worldwide, Inc. March...

  • Page 3: Table Of Contents

    Table of Contents Important Safeguards Important Safeguards ...1 Making Copies Applying Power ... 1-1 Main Power Switch ... 1-1 Operation Key ... 1-1 Selecting the Mode of Operation... 1-2 Making Copies... 1-3 Component Identification Control Panel ... 2-1 Component Locations - Front ... 2-3 Component Locations - Rear ...
  • Page 4 Table of Contents 7 7 I 7 7 I I G I I I Combine Copying ... 4-4 Series Copying... 4-6 Book to 1 Sided ... 4-6 2 Sided to 1 Sided ... 4-7 User Tools Settings System Settings... 5-1 Basic Steps to Accessing System Settings ...

  • Page 5: Important Safeguards

    Important Safeguards...

  • Page 6: Important Safeguards

    Chapter for this value. Power cords rated for less can overheat and become a fire hazard. Do not operate the unit if any part of it is damaged, or if any part has been dropped, until it is checked by a authorized Lanier Service Technician. The fusing area is hot. Exercise care in this area.

  • Page 7: Making Copies

    Chapter 1 Making Copies...

  • Page 8: Chapter Overview

    Chapter Overview Included in this chapter are: • “Applying Power” on page 1-1 • “Selecting the Mode of Operation” on page 1-2 • “Making Copies” on page 1-3 Making Copies...

  • Page 9: Applying Power

    Applying Power Two switches control the machines power. The Main Power switch controls the power to the machine. The Operation key turns the machine on and off. It is recommended that the Main Power switch always be left in the On position. Information in memory may be lost if the switch is turned off.

  • Page 10: Selecting The Mode Of Operation

    Selecting the Mode of Operation Selecting the Mode of Operation You can use this machine as a: • Copy machine • Facsimile machine (option) • Printer (option) Press one of the Function keys to select the desired mode of operation. Limitations You cannot switch modes in any of the following cases: •...

  • Page 11: Making Copies

    Making Copies Check the Function key to be sure the machine is in the copy mode. If not, press the Copy key. If the User Code feature is activated, the message “Input user code, then press #” is displayed. Enter your User Code using the keypad.
  • Page 12 Making Copies Note: If you only want one copy with no options, proceed to Step 5. Copy Options You Can Select Copy Quantity Copy Darkness/Lightness Original Mode Copy Reduction or Enlargement Copying Methods Press the Start key to begin copying. 1 - 4 Methods To Use For Copy Options Using the keypad, enter the number of copies you...

  • Page 13: Component Identification

    Chapter 2 Component Identification...
  • Page 14 Chapter Overview Included in this chapter are: • “Control Panel” on page 2-1 • “Component Locations - Front” on page 2-3 • “Component Locations - Rear” on page 2-4 • “Status Display Indicators” on page 2-5 • “Graphics Display” on page 2-6 Component Identification...

  • Page 15: Control Panel

    Control Panel Control Panel With Fax and Printer Options Installed Indicators for fax mode (for machines with the optional fax function) See the “Facsimile Reference”. Facsimile Mode key Press to use facsimile functions. Printer Mode key Press to use printer functions. Copy Mode key Press to use copy functions.
  • Page 16 Control Panel - continued Fax function keys (Fax installed machine only) Press to change modes. To use copy functions, press the Copy key. Printer function keys (Printer installed machine only) Press to change modes. To use copy functions, press the Copy key.

  • Page 17: Component Locations - Front

    Component Locations - Front Platen cover or document feeder (option) Lower the platen cover over originals placed on the exposure glass for copying. If you have the document feeder, insert a stack of originals here. They will be fed automatically. When the document feeder (RADF) is installed, you can copy two- sided originals.

  • Page 18: Component Locations - Rear

    Paper Tray Cover Open this cover to remove jammed paper fed from the optional paper tray unit. 2 - 4 5515 5518 Lower Right Cover (5518) Open this cover to remove jammed paper from the optional System Stand.

  • Page 19: Status Display Indicators

    Status Display Indicators Door Open When this symbol is on, the front door is open. Paper Misfeed When this symbol is on, there has been a paper misfeed of an original or a copy somewhere in the machine. See item 5. Add Toner When this symbol is on, your copier is low on toner.

  • Page 20: Graphics Display

    Graphics Display Upper line: The machine status or currently selected functions appear here. Bottom line Items which can be selected or specified, or messages appear here. Currently selected items are displayed with brackets. 2 - 6 Number of copies Copy quantity is displayed here. Component Identification...

  • Page 21: Copier Functions

    Chapter 3 Copier Functions...
  • Page 22 Chapter Overview Included in this chapter are: • “Entering User Codes” on page 3-1 • “Document Feeder” on page 3-2 • “Using Auto Start” on page 3-4 • “Selecting Copy Quantities” on page 3-5 • “Selecting Copy Darkness Modes” on page 3-6 •...

  • Page 23: Entering User Codes

    Entering User Codes This feature prevents unauthorized use of the copier by limiting copier access to those persons who know an assigned User Code. The User Code feature monitors copier usage by department, project, or persons, and tracks the number of copies made with each User Code. The Key Operator can activate the User Code feature.

  • Page 24: Document Feeder

    Document Feeder Document Feeder The Reversing Automatic Document Feeder (RADF), feeds originals to the Exposure Glass for copying and if Duplex Copying is selected, it turns the original over for copying the other side of the original. Then, it exits the original onto the Document Tray. •...

  • Page 25: Radf - Feeding Stack Of Originals

    RADF - Feeding Stack of Originals RADF allows you to stack feed up to 50 originals into the Document Feeder by pressing the Start key one time. If you are feeding single sheets into the Document Feeder, switch the copy mode to SADF and you will not have to press the Start key for each original.

  • Page 26: Using Auto Start

    Using Auto Start Using Auto Start When the copier is first turned ON, it takes only 25 seconds for it to warm-up and come to its Ready condition. During this time, you can set up your copy job, press the Start key and walk away.

  • Page 27: Selecting Copy Quantities

    Selecting Copy Quantities The copier automatically selects a copy quantity of one copy. • If desired more than one copy, enter the number from the 10-key pad. • The maximum copy quantity that you can enter is 99. If more than one copy of your original is required, enter the number of copies you desire using the key pad.

  • Page 28: Selecting Copy Darkness Modes

    Selecting Copy Darkness Modes Selecting Copy Darkness Modes Select the copy darkness modes using: • Auto Image Density • Manual Select the Copy Darkness setting before making your copy. If you do not, the copier uses Auto Image Density mode, as the default setting. Using Auto Image Density Mode Auto Image Density, automatically adjust the copier for the best quality copy.

  • Page 29: Photo

    Selecting Original Modes Identify the type of original you are copying by selecting: • Text • Photo Text is automatically selected as the default setting. Press the Original key to step through the settings. Select your desired setting. Text Select text when your original contains only text and no pictures. Photo Select Photo when copying photographs and colored originals.

  • Page 30: Selecting Copy Paper

    Selecting Copy Paper Selecting Copy Paper Your copier provides two ways to select copy paper: • Auto Paper Select • Manual Paper Select Using Auto Paper Select The copier automatically selects a suitable size copy paper based on the original size and reproduction ratio.

  • Page 31: Using Manual Paper Select

    Using Manual Paper Select You can manually select a paper tray. Select the paper tray or Bypass Tray by pressing the Select Paper Tray key. The display shows the paper size in the tray and the tray selected. Proceed with your copy set up selections. Press the Start key to begin copying.

  • Page 32: Enlargement And Reduction Ratios

    Enlargement and Reduction Ratios Enlargement and Reduction Ratios Your copier allows you to enlarge or reduce your copies using: • Auto Reduce/Enlarge • Preset Copy Ratios • Zoom Key: with 1% increments Using Auto Reduce/Enlarge The copier automatically chooses the appropriate reproduction ratio based on the paper and original sizes you select.

  • Page 33: Using Preset Copy Ratio Keys

    Using Preset Copy Ratio Keys The preset Copy Ratio keys allows you to select from thirteen preset reduction and enlargement ratios. • There are three preset Enlarge ratios to choose from: 121%, 129%, and 155% • There are four preset Reduce ratios to choose from: 93%, 78%, 65%, and 50%. •...

  • Page 34: Zoom Keys

    Enlargement and Reduction Ratios Zoom Keys The Zoom key allows you to select a precise copy ratio selection from 50% to 200% in one percent increments. You can use the cursor keys, or the keypad to change the copy ratio. Press the Zoom key.

  • Page 35: Sort

    Sort The machine can scan your originals into memory and automatically sort the copies in two methods. Press the Sort key. Enter the number of copy sets using the Key pad. The maximum number of sets is 99. Set your originals. When setting a stack of originals in the document feeder 1.

  • Page 36: Energy Saving Modes

    Energy Saving Modes Energy Saving Modes The copier has three levels of Energy Saving modes. • Level 1 • Level 2 • Auto Shut-Off Mode These energy saving modes are selectable using the User Codes. Level 1 Power Consumption: Reduces power by approximately 40% compared to standby mode. Warm Up Time: Approximately 15 seconds.

  • Page 37: Copying Methods

    Chapter 4 Copying Methods...

  • Page 38: Chapter Overview

    Chapter Overview Included in this chapter are: • “Bypass Copying” on page 4-1 • “Combine Copying” on page 4-4 • “Series Copying” on page 4-6 Copying Methods...

  • Page 39: Bypass Copying

    Bypass Copying Use the bypass tray to copy onto OHP transparencies, adhesive labels, translucent paper, post cards, and copy paper that cannot be set in the paper tray. The machine automatically detects the following paper sizes: • Letter (8.5 x 11) •...

  • Page 40: When Copying Onto Ohp Transparencies

    Bypass Copying Lightly insert the copy paper face down and adjust the paper guide. 1 Horizontal size 2 Vertical size 3 Paper Extender 4 Paper Guide • Do not stack paper over the limit mark; otherwise a skew image or paper misfeeds might occur.
  • Page 41 When Copying onto Non-Standard Size Paper Note: You should specify the size of copy paper to avoid paper misfeeds Note: The settings for non-standard size paper can be made only when the optional document feeder is installed. 1. Press the (#) key. 2.

  • Page 42: Combine Copying

    Combine Copying Combine Copying Combine copy, combines originals into one copy. You cannot use the Duplex or the Bypass Tray with this feature. There are two types of copies that you can make in this mode: 1. 1 Sided 2 Pages to Combine 1 Side: Copies two 1-sided originals to one side of a sheet.
  • Page 43 Landscape Originals Selecting Combine Copying Press the Combine/ Series key. Make sure that “Combine” is selected, then press the OK key. Press the Cursor keys until the desired combine mode is displayed, then press the OK key. • In 4 pages mode, you can specify the orientation of originals when you have set “Orientation”...

  • Page 44: Series Copying

    Series Copying Series Copying You can make one-sided copies from two facing pages of bound (book) originals and from two- sided originals. Two methods are available: Book to 1 Sided: You can make one-sided copies from two facing pages of a bound original (book).

  • Page 45: Sided To 1 Sided

    2 Sided to 1 Sided You can make 1 sided copies from two-sided originals. Press the Combine/ Series key. Press right Cursor key to select “Series”, then press the OK key. Press right Cursor key to select 2P >, 4P > 1 symbol. Then, press the OK key. Press the Select Paper Tray key until the paper you require is displayed.
  • Page 46 Series Copying Notes: 4 - 8 Copying Methods...

  • Page 47: User Tools Settings

    Chapter 5 User Tools Settings...
  • Page 48 Chapter Overview Included in this chapter are: • “System Settings” on page 5-1 • “Copier Feature Settings” on page 5-6 User Tools Settings...

  • Page 49: System Settings

    System Settings Basic Steps to Accessing System Settings Step The tables on the following pages provide you with information necessary to access the System Settings Exiting from User Tools After changing the User Tools settings, press the User Tool key. User Tools Settings Procedure to Perform Press the User Tools key.

  • Page 50: Printing The Counter Value

    System Settings Printing the Counter Value Press the User Tools key. Make sure “1.Counter” is displayed, then press the OK key to view the total number of prints. Press the Print key. Press the Start key. 5 - 2 User Tools Settings...

  • Page 51: System Settings

    1 to 240 minutes. In Low Power mode, power consumption is reduced by 30% compared with Standby mode. This value applies to 5515 Copier features only. Default:15 minutes You can select the Energy Saver level. Level 1 •...
  • Page 52 System Settings Menu 6. Auto Off Timer 7. AOF (Keep It On.) 8. Special Paper Size 9. Pap.Tray Priority (for Copy mode only) 5 - 4 Description The machine turns itself off automatically to conserve energy after your job is finished, after the selected time.This function is called “Auto Off”.The time can be set from 1 to 240 minutes.
  • Page 53 Menu 10. Auto Tray Switch (for copy mode only) 11. Print Priority (setting the multi-accessing function) 12. Display Contrast 13. Paper Status 14. Key Op. Tools 1 Show Counter 2 Print Counter 3 Key Op. Access 4 Prog. Key Op. Code User Tools Settings Description If you load paper of the same size in two or more trays, the...

  • Page 54: Copier Feature Settings

    Copier Feature Settings Copier Feature Settings Basic Steps to Accessing Copier Feature Settings Step The tables on the following pages provide you with information necessary to access the System Settings Exiting from User Tools • You can exit the User Tools mode by pressing the Cancel key. •...

  • Page 55: Copier Features

    Copier Features Menu 1. APS.Auto R/E 2. Max.Copy Q'ty 3. Adjust Orig. Mode 4. Set Ratio 5. Copy Reset Timer 6. SADF Auto Reset 7. R.Sort Aut.Cont 8. Orientation 9. Sort 12. Key Op.Tools If the machine is set to use the User Code function, operators must input their user codes before the machine can operate.
  • Page 56 Copier Feature Settings Menu 1. User Code Access 2. Check Copy Counter 3. Print Counter List 4. Reset Counter 5. Clear all User Codes 6. Reset All Counters 7. Program User Code 8. Change User Code 9. Delete User Code 5 - 8 Description Specify whether to employ user codes to restrict copier...

  • Page 57: Service And Supplies

    Chapter 6 Service and Supplies...
  • Page 58 Chapter Overview Included in this chapter are: • “Loading Paper” on page 6-1 • “Changing Paper Size” on page 6-3 • “Changing the Toner Cartridge” on page 6-7 • “Clearing Paper Misfeeds” on page 6-9 • “When the Machine Does Not Operate Properly” on page 6-10 •...

  • Page 59: Loading Paper

    Loading Paper Paper Trays 1 and 2: maximum of 250 sheets of paper. Optional System Stands: maximum of 500 sheets of paper in each paper tray. Loading Paper in Trays 1 and 2 Pull out the paper tray until it stops. Press the metal plate down, then, sSquare the paper and set it in the tray.

  • Page 60: Loading Paper In The System Stand

    Loading Paper Loading Paper in the System Stand Make sure that the optional paper tray unit is not being used. Pull out the paper tray until it stops. While pinching the release lever, adjust the back fence. Square the paper and set it in the tray 6 - 2 Service and Supplies...

  • Page 61: Changing Paper Size

    Changing Paper Size Two procedures for changing the paper size are given below. • The first is for changing the paper size in Paper Tray 1 or the optional System Stand • The second is for changing the paper size in Paper Tray 2. Note: Please check you are following the appropriate procedure before you start.
  • Page 62 Changing Paper Size Press down the release button. While pressing the release lever, adjust the side paper guides. Push the metal plate down. (This is for Trays 1 and 2) Note: Do not stack paper over the limit mark. 6 - 4 Service and Supplies...
  • Page 63 Square the paper and set it in the tray. While pressing the release lever, adjust the side and back paper guides to the new paper size. Note: When setting small quantities of copy paper, be careful not to squeeze in the side paper guides too much or paper will not be fed properly.

  • Page 64: Setting Non-Standard Size Paper

    Changing Paper Size Setting Non-Standard Size Paper Press the Select Paper Tray key to select the second paper tray. Then press the # key. Press the Cursor keys until the paper size you want to use is displayed. When the Paper Size Require is Displayed Press the OK key.

  • Page 65: Changing The Toner Cartridge

    Changing the Toner Cartridge Open the Front Cover. Pull out on the handle on the Toner Bottle Holder until the Toner Bottle holder is fully opened. Pull the green lever and gently pull the Toner Bottle out. Hold a new Toner Bottle horizontally and shake it five or six times to loosen the toner.
  • Page 66 Changing the Toner Cartridge Remove the outer cap. Note: Do not remove the Inner Cap. Place the new Toner Bottle in position, turn it clockwise, then return the green lever back to its closed position. Return the Toner Bottle Holder to its original position.

  • Page 67: Clearing Paper Misfeeds

    Clearing Paper Misfeeds When removing misfed paper, do not touch the fusing section because it could be very hot • Important: When clearing misfeeds, do not turn off the power switch. If you do, your copy settings are cleared. • To prevent misfeeds, do not leave any torn scraps of paper within the machine.

  • Page 68: When The Machine Does Not Operate Properly

    When the Machine Does Not Operate Properly When the Machine Does Not Operate Properly Message Machine Status Please wait Cannot detect original size. Check original orientation. Check paper size. You cannot enter the desired copy set number. The machine instructs you to set the key counter.

  • Page 69: When Copies Are Not Clear

    When Copies are Not Clear Problem Copies appear dirty. The reverse side of an original image is copied. A shadow appears on copies if you use pasted originals. The same copy area is dirty whenever making copies. Copies are too light. Parts of the image is not copied.

  • Page 70: Can Not Make Proper Copies

    Can Not Make Proper Copies Can Not Make Proper Copies Combine Problem Parts of the image are not copied. Order of copies is not correct. 6 - 12 Cause You specified an improper reproduction ratio that does not meet the sizes of your originals and copy paper.

  • Page 71: Cleaning The Copier

    Cleaning the Copier A dirty Exposure Glass or Document Feeder Belt may have an effect on the quality of your copies. Inspect them and clean as necessary. Cleaning the Machine Wipe the copier with a soft, damp cloth and then dry it. Do not use chemical cleaner or organic solvent, such as thinner or benzene.
  • Page 72 Cleaning the Copier Notes: 6 - 14 Service and Supplies...

  • Page 73: Specifications

    Chapter 7 Specifications...

  • Page 74: Chapter Overview

    Chapter Overview Included in this chapter are: • “Main Copier Unit” on page 7-1 • “Document Feeder - option” on page 7-4 • “1 Tray System Stand - option” on page 7-5 • “2 Tray System Stand - option” on page 7-6 •...

  • Page 75: Main Copier Unit

    Main Copier Unit Configuration: • Desktop Photosensitivity type: • OPC drum (30) Original scanning: • One-dimensional solid scanning system through CCD Copy process: • Dry electrostatic transfer system Development: • Dry two-component magnetic brush development system Fusing: • Heating roll system Resolution: •...
  • Page 76 First copy time: • 6.9 seconds or less (8 1 /2”× 11", 100%, feeding from 1st paper tray) Copying speed 5515: • 15 copies/minute (8 1 /2”× 11") • 9 copies/minute (11” x 17”) with optional 16 MB memory installed •...
  • Page 77 Stand-by: approximately 125Wh • Copying: 450Wh • Maximum: 1200W Dimensions (W x D x H up to exposure glass): • 5515: 21.65"× 22.36"× 16.54" • 5518: 21.65"× 22.36"× 20.39" Noise Emission (ISO7779 Sound Power Level) Based on actual measurement Mainframe only: •...

  • Page 78: Document Feeder - Option

    Document Feeder - option Document Feeder - option Mode: • ADF/RADF mode, SADF mode Original size: • 11"× 17" to 5 1 /2”× 8 1 /2” Original weight: • 1-sided originals: 14 –28 lb. Number of originals to be set: •...

  • Page 79: Tray System Stand - Option

    1 Tray System Stand - option Copy paper weight: • 16 –28 lb. Available paper size: • 5 1 /2”× 8 1 /2”, 8 1 /2”× 11", 8"× 13", 8 1 /2”× 13", 8 1 /2”× 14", 8 1 /4”× 13", 11"× 17", 7 1 /4”×...

  • Page 80: 16Mb Copier Memory Unit - Option

    2 Tray System Stand - option 2 Tray System Stand - option Copy paper weight: • 16 – 28 lb. Available paper size: • 5 1 /2”× 8 1 /2”, 8 1 /2”× 11", 8"× 13", 8 1 /2”× 13", 8 1 /2”× 14", 8 1 /4”× 13", 11"×...

  • Page 81: Agency Certifications

    Reglements sur I'Interference Radio du Department Canadien de Communications. This product complies with the requirements of the EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC, and the Harmonisation Directive 93/68/EEC. Lanier Worldwide, Inc. Im Taubental 6 41468 Neuss 1 Germany...

  • Page 82: Epa Energy Star

    Agency Certifications The 5515 AG and 5518 AG digital copiers are intended for use in areas with 120V, 60 Hz, AC line voltage. You should ensure you are connecting your equipment into the proper line voltage. EPA Energy Star The United States Environmental Protection Agency (EPA) has introduced a voluntary program, the Energy Star Program, to encourage the widespread and voluntary use of energy-efficient technologies that enhance the workplace, improve product performance, and prevent pollution.

  • Page 83: Paper Sizes

    Paper Sizes Type EUROPE B-FORMAT Specifications Paper Size STATEMENT 5.5 x 8.5 inches LETTER 8.5 x 11 inches LEGAL 8.5 x 14 inches COMPUTER 10.125 x 14 inches LEDGER 11 x 17 inches FOOLSCAP and 8.5 x 13 inches OFFICIO FOOLSCAP 8 x 13 inches FOLIO...

  • Page 84: Enlargement And Reduction Percentages

    Enlargement and Reduction Percentages Enlargement and Reduction Percentages Type Enlargement Full Size Reduction 7 - 10 Inch Version 400% 400% 200% 200% 155% 141% 129% 122% 121% 115% 100% 100% Metric Version Specifications...

  • Page 85: Glossary

    Glossary...
  • Page 86 Chapter Overview Definitions for the most often used terms are listed here.

  • Page 87: Copier Terms

    Copier Terms % (percentage) The ratio of the original image size to the copied image size. If the copy image is larger than the original, the % number is larger. A copied image that is twice the size of the original is said to be 200%. If the copy image is smaller than the original, the % number is lower.
  • Page 88 Copy Paper See: paper Copy Quantity This display or part of a Touch Screen shows the requested number of copies. Copy Size Keys Keys used to input the desired size of the copy. Darker Copies This term refers to the amount of toner placed on the copy through the imaging process.
  • Page 89 efficient technologies in the workplace. Requirements to qualify for certification vary based on the speed of a Copier. For specifics on your Copier, check the Specifications section of this Guide. Exit Tray A tray attached to the output end of the copier to collect copies. This tray is usually removed when a Sorter or Finisher is installed.
  • Page 90 condition. These settings may be either the Factory Default settings, or Factory Default settings that have been modified permanently by either you or your Service Technician to better fit your application. Interrupt Key The Key used to interrupt a long copy job in process in order to run a single copy.
  • Page 91 Start Key This Key is used to start the copying process once all selections have been made. On a Lanier copier, it is always green in color. Toner The black powder that is used to form the image on copy paper. In a color copier, it would be colored.
  • Page 92 Make sure the toner you add is correct for your copier before loading. See the NOTE above. Transparencies A clear plastic stock used to make an overhead transparency. Because they are clear, they don’t feed from paper Drawers or Cassettes. However, many Bypass Feed Trays are designed to handle transparency stock.
  • Page 93 Index...
  • Page 94 Access codes 3-1 Agency certifications Canada RFI 7-7 EPA energy star 7-8 USA RFI 7-7 Auto image density 3-6 Auto reduce/enlarge 3-10 Auto start 3-4 Bypass copying 4-1 Certifications Canada rfi 7-7 EPA energy star 7-8 USA rfi 7-7 Combine copying 4-4 Copy darkness/lightness 1-4 option table 1-4...
  • Page 95 System settings accessing 5-1 exiting 5-1 Toner cartridge, changing 6-7 Troubleshooting 6-10 Turning on copier 1-2 UL 7-7 User codes entering 3-1 User codes, entreing 3-1 User tools copier feature settings 5-6 copy 5-1 system 5-1 system settings 5-1 Zoom keys 3-12 I - 3...

  • Page 96: Warranty

    (90) days from the date of first installation by Lanier’s Authorized Dealer. Customers must notify a Lanier servicing dealer or Lanier of a warranty claim within the warranty period. For a listing of authorized Lanier servicing dealers or to notify Lanier of a warranty claim, write to Lanier Worldwide, Inc., 2300...
  • Page 97 Customer Vision® our commitment to your complete satisfaction www.lanier.com your document management partner Lanier Worldwide, Inc. | 2300 Parklake Drive, N.E. | Atlanta, GA USA 30345 B0397901 T1202-5383...

This manual is also suitable for:

5518

Table of Contents