Paper Misfeeds in the Paper Feed Path
Exit Side Misfeeds
1
Push the Finisher Release Lever to release the optional finisher from
the copier and move the Finisher away from the copier.
If the Finisher is not used, remove the Exit Tray.
2
Open the Exit Door.
3
Remove the misfed paper.
4
Close the Exit Door.
5
If a Finisher is used, push the Finisher back in place against the
copier.
If the Finisher is not used, set the Exit Tray back in place.
Service and Supplies
Paper Misfeeds in the Paper Feed Path
7 - 18