Expansion Links; Expansion Configuration; Redundant-Controller Raid To Redundant-Controller Jbods - Infortrend EonStor S12F-R1432 Installation And Hardware Reference Manual

Figure 3-6: Connecting SFP Transceiver and LC Type Cables
Step 7.
3.4

Expansion Links

Expansion enclosures are connected with the subsystem through the
"SAS Exp." ports. Please see below for matching RAID and JBOD
and required cables.
RAID Models
S12F-R1432
S12F-G1433
3.4.1

Expansion Configuration

3.4.1.1
The redundant-controller model, S12F-R1432, can connect up to 3
JBODs.
Remove the protective caps on the other end of the
cable and connect this end to an SFP transceiver
module on a Fibre Channel switch port or a Fibre
Channel host bus adapter (HBA) port.
2U JBOD
S12S-J1002-R
S12S-J1000-G
Redundant-controller RAID to Redundant-
controller JBODs
Chapter 3: Subsystem Connection
Required Cables
(between RAID
and JBOD)
SFF-8088 to SFF-
8088
SFF-8088 to SFF-
8470
Required Cables
(between JBODs)
SFF-8088 to SFF-
8088
SFF-8470 to SFF-
8470
3-11