Cooling Module Leds - Infortrend EonStor S12F-R1432 Installation And Hardware Reference Manual

EonStor S12F-R1432/G1433 Installation and Hardware Reference Manual
Intermittent
Flashing Green
Static Green
Static Amber
(S12F-R1432)/
Static Red
(S12F-G1433)
4.4.6

Cooling Module LEDs

On S12F-R1432, each cooling module has two (2) amber LEDs
located on the PSU canister. Each LED corresponds to an individual
cooling fan. (See Figure 4-14) On S12F-G1433, each cooling
module has one (1) red LED located on the right upper corner of the
module itself (See Figure 4-15) Please refer to the cooling module
LED definitions shown in the table below.
4-14
Figure 4-13: PSU LED on S12F-G1433
Color
The power supply has not been turned on. The
PSU LED flashes when the subsystem is
connected to a power source but not yet
turned on.
The PSU is operating normally.
The PSU has failed and is unable to provide
power to the subsystem.
OFF The PSU is not turned on and the power cord
is disconnected.
Table 4-7: PSU LED Definitions
Status