Section7. Landing Gear Installation
Step1. Locate the items for installing main landing
gear
Step2. Use two wheel collars to secure the wheel to
the landing gear strut.
www.valuehobby.com/aviator-trainer-25-arf.html
Step3. Repeat steps 2 through 3 to install the other
wheel.
Step4. Use a hobby knife to remove the coverings
from the fuselage for the landing gear.
Step5. Insert the landing gear strut into the
pre-drilled hole in the fuselage.
Step6. Use two landing gear straps and four
M3*12mm (0.5inch) self-tapping screws to secure the
landing gear to the fuselage.
16