Table of Contents
Advertisement
Step10. Install two servos to the fuselage. With
rudder elevator and steering arm centered, tighten
the screw to secure the pushrods to the arm.
Step11. Install the electric motor to the mount.
www.valuehobby.com/aviator-trainer-25-arf.html
Section6. Nitro Engine Installation
Step1. Position the nitro engine on the fuselage.
Step2. Install the engine to the mount.
Step3. Connect the Φ1.5 x 350mm (13.8inch)
throttle pushrod to the engine.
14
Advertisement
Table of Contents
