Exit Roller Assembly Removal; Gear Box Assembly Removal; Large Feed Roller Removal - Lexmark Optra Color 45 Service Manual

4080-001

Exit Roller Assembly Removal

1. Remove the input / output tray assembly.
2. Remove all covers, refer to
3. Remove the carrier frame assembly, refer to the
Frame Assembly Removal" on page
4. Remove the three screws from the right side frame and remove
the frame.
5. Remove the exit roller.

Gear Box Assembly Removal

1. Remove the input / output tray assembly.
2. Remove all covers, refer to
3. Remove the carrier frame, refer to the
Assembly Removal" on page
4. Depress the plastic clip on the clutch lever at the end of the
large feed roller shaft and remove the clutch lever. Be sure the
grove on the clutch lever aligns with the clutch spring.
5. Remove the two screws securing the gear box assembly to the
frame.
6. Depress the gear box clip on the bottom of the left side frame
and remove the gear box assembly and shaft.

Large Feed Roller Removal

1. Remove the input / output tray assembly.
2. Remove all covers, refer to
3. Remove the exit roller assembly, refer to the
Assembly Removal" on page
4. Unlatch the spring at the left end of the large feed roller shaft, by
lifting up on the latch release lever.
5. Remove the tension spring from the end of the large feed roller
shaft and remove the large feed roller.
"Covers and Doors" on page
4-11.
"Covers and Doors" on page
"Carrier Frame
4-11.
"Covers and Doors" on page
4-15.
Repair Information
4-3.
"Carrier
4-3.
4-3.
"Exit Roller
4-15