Hcf Pick Solenoid Assembly Removal - Lexmark W850n Service Manual

4024-110

HCF pick solenoid assembly removal

1.
Remove the HCF media tray assembly from the printer. See
page 4-127.
2.
Remove the HCF media feed unit assembly. See
page 4-132.
3.
Remove the HCF feed lift motor. See
4.
Remove the HCF feed lift gear bracket. See
5.
Remove the two screws securing the HCF solenoid bracket (A) to the HCF media feed unit assembly (B).
6.
Remove the HCF solenoid bracket (A).
7.
Disconnect the connector of the harness from the HCF solenoid (C) to the HCF media feed unit assembly
(B).
8.
Release the harness from the clamp.
9.
Remove the HCF media tray lift coupling assembly. See
removal" on page
10.
Remove the two screws securing the bracket (D).
11.
Remove the bracket (D).
12.
Remove the two screws securing the main HCF connector (E) to the HCF solenoid bracket (A).
13.
Remove the HCF main connector (E).
14.
Remove the two connectors from the HCF main connector (E).
15.
Release the hooks securing the connector (F) to the HCF solenoid bracket (A).
16.
Remove the connector (F).
17.
Remove the two screws securing the HCF solenoid (C) to the HCF solenoid bracket (A).
18.
Remove the HCF solenoid (C).
D
Note: When replacing the solenoid, make sure to insert the metal pin of the HCF solenoid (C) into the lever.
4-136
Options Service Manual
"HCF feed lift motor removal" on page 4-132
"HCF feed lift gear bracket removal" on page
4-135.
A
Lever
Metal pin
F
E
"HCF media tray assembly removal" on
"HCF media feed unit assembly removal" on
"HCF media tray lift coupling assembly
C
B
4-133.