Cluster Member Management - H3C S5810 Series Operation Manual

To do...
Configure the interval to send
MAC address negotiation
broadcast packets
When you configure the destination MAC address for cluster management protocol packets:
If the interval for sending MAC address negotiation broadcast packets is 0, the system
automatically sets it to 1 minute.
If the interval for sending MAC address negotiation broadcast packets is not 0, the interval remains
unchanged.

Cluster Member Management

You can manually add a candidate device to a cluster, or remove a member device from a cluster.
If a member device needs to be rebooted for software upgrade or configuration update, you can
remotely reboot it through the management device.
Adding a member device
To do...
Enter system view
Enter cluster view
Add a candidate device to the
cluster
Removing a member device
To do...
Enter system view
Enter cluster view
Remove a member device from
the cluster
Rebooting a member device
To do...
Enter system view
Enter cluster view
Use the command...
cluster-mac syn-interval
interval
Use the command...
system-view
cluster
add-member
[ member-number ]
mac-address mac-address
[ password password ]
Use the command...
system-view
cluster
delete-member
member-number
[ to-black-list ]
Use the command...
system-view
cluster
1-12
Remarks
Optional
One minute by default.
Remarks
—
—
Required
Remarks
—
—
Required
Remarks
—
—