H3C S5810 Series Operation Manual page 680

Ethernet switches

Hide thumbs Also See for S5810 Series:

Table of Contents

seqNO = <11> srcIP = <1.1.1.2> op = <set> errorIndex = <0> errorStatus =<noError> node =

<sysName(1.3.6.1.2.1.1.5.0)> value = <Sysname>

Table 1-1 Description on the output field of SNMP log

Jan 1 02:49:40:566 2006

The system information of the information center can be output to the terminal or to the log buffer. In this

example, SNMP log is output to the terminal. For configuration of SNMP log output to other destinations,

see Information Center Configuration in the System Volume.

The time when the SNMP log is generated

Serial number of the SNMP log (The system numbers

the recorded SNMP logs automatically; the serial

number starts from 0)

IP address of the NMS

SNMP operation type (GET or SET)

Node name of the SNMP operations and OID of the

Error index, with 0 meaning no error

Error status, with noError meaning no error

Value set when the SET operation is performed (This

field is null, meaning the value obtained with the GET

operation is not logged.)

When the value is a string of characters and the string

contains characters not in the range of ASCII 0 to 127 or

invisible characters, the string is displayed in

hexadecimal. For example, value = <81-43>[hex]

Chapters

Table of Contents