Configuring Isp Domain Attributes - H3C S5810 Series Operation Manual

To do...
Return to system view
Specify the default ISP domain
You cannot delete the default ISP domain unless you change it to a non-default ISP domain (with
the domain default disable command) first.
If a user enters a username without an ISP domain name, the device uses the authentication
method configured for the default ISP domain to authenticate the user.

Configuring ISP Domain Attributes

Follow these steps to configure ISP domain attributes:
To do...
Enter system view
Enter ISP domain view
Place the ISP domain to the
state of active or blocked
Specify the maximum number
of active users in the ISP
domain
Configure the self-service
server localization function
A self-service RADIUS server, for example, Intelligent Management Center (iMC), is required for the
self-service server localization function to work. With the self-service function, a user can manage and
control his or her accounting information or card number. A server with self-service software is a
self-service server.
Use the command...
quit
domain default enable
isp-name
Use the command...
system-view
domain isp-name
state { active | block }
access-limit enable
max-user-number
self-service-url enable
url-string
1-13
Remarks
—
Optional
By default, the system has a
default ISP domain named
system.
Remarks
—
—
Optional
When created, an ISP domain
is in the active state by default,
and users in the domain can
request network services.
Optional
No limit by default
Optional
Disabled by default