Preparing The G350 With An S8300 For A Remote Configuration - Avaya G350 Quick Start For Hardware Installation

7. If you have a software update (patch) file for Communication Manager, use the Install
Update page to select the file and update the software.
8. If you are not using IW to generate basic translations, select the Translation will be added
after the installation option on the Translation Source page.
9. On the Security File page, load the License file that you prepared from your laptop.
Note:
If you are using IW to generate basic translations, initially you load a license file
Note:
with the DADMIN feature enabled. At the conclusion of the IW configuration, you
load a second license file with the DADMIN feature disabled.
10. On the Media Gateway IP Address page, click
11. On the Firmware page, upgrade G350 and Media Module firmware. New firmware files can
be loaded from your laptop directly into the Media Server /tftpboot directory, if needed.
12. On the Authentication File page, load the Authentication file that you prepared from your
laptop.

Preparing the G350 with an S8300 for a remote configuration

If you need to prepare the G350 with an S8300 for a remote configuration, you must attach and
enable a modem.
To prepare the G350 with an S8300 for a remote configuration:
1. Connect a USB modem to one of the USB ports on the S8300 Media Server.
2. From the Integrated Management Main Menu select Launch Maintenance Web Interface
(see Figure 8: Integrated Management Main Menu
3. Use the Maintenance Web Pages to enable the modem.
4. To ensure that the modem is enabled correctly, setup a dialup connection on a remote PC
with the following settings:
Automatically detect settings.
No Username, Password, or Domain.
Security > Show Terminal Window.
5. Dial in to the modem from the remote PC.
6. When prompted, provide the rasaccess login and password in the Terminal Window.
7. Close the Terminal Window to complete the connection.
8. A remote technician can now access the S8300 remotely and run IW. Open Internet
Explorer and browse to 10.3.0.1.
Preparing a G350 with an S8300 Media Server
to configure the G350.
on page 30).
Issue 3 June 2005 31