Connecting Power; Led Sequence - Avaya G350 Quick Start For Hardware Installation

Connecting Power

To connect the power:
1. Connect the AC power cable to the inlet receptacle on the rear of the chassis.
2. Connect the other end of the power cable into a mains socket.

LED Sequence

When you turn on the G350, the following LED sequence occurs:
1. The PWR LED on the front panel lights.
2. The CPU LED lights if the firmware is running.
3. At least one LED on each media module lights initially and then goes off after about 20
seconds.
Connecting Power
Issue 3 June 2005 27