Preparing A G350 With An S8300 For Configuration - Avaya G350 Installation Manual

Preparing for configuration
Step 1: Prepare configuration equipment
10
Select Enable the modem and continue the installation remotely. The Connect Modem screen
appears:
11
Click Finish.
12
Connect a serial modem to a working telephone line.
13
Connect the provided DB-25 adapter to the modem.
14
Disconnect the flat cable from the COM port of the laptop computer.
15
Connect the flat cable to the DB-25 connector on the modem.
The G350 is now prepared for remote configuration via the modem. See
on page 40) for information about how you will need to assist the supporting technician to configure the
G350 from a remote location.
Preparing a G350 with an S8300 for
configuration
If you installed an S8300 in the G350 and all the configuration will be done on-site, the G350 is ready for
the supporting technician to set up the G350 for configuration and perform the configuration. You will
need to assist the technician (see
If you installed an S8300 in the G350, and some or all of the configuration will be done remotely (see
Step 2: Assist the configuration
1
Connect and enable the USB modem. See
2
If the supporting technician requires a USB CD-ROM drive to download software upgrades,
connect the USB CD-ROM drive to the remaining available USB port on the S8300 module.
36
Assisting an on-site configuration
on page 40) prepare for configuration as follows:
Connecting the USB modem
Installation of the G350 Media Gateway
Step 2: Assist the configuration
on page 40).
on page 37.
December 2003