Preparing The Inads Ip Address; Preparing Needed Hardware; Laptop; Modem - Avaya G350 Quick Start For Hardware Installation

Before you Start

Preparing the INADS IP address

The INADS IP address is required in order to configure the S8300's modem for alarming. If you
are preparing a G350 with an S8300 for a remote install, you must first obtain an INADS IP
address. You use the Automatic Registration Tool (ART) to obtain an IP address for an INADS
alarming modem.
To obtain an INADS IP address:
1. Access the ART Web site on your laptop at http://art.dr.avaya.com.
2. Select Administer S8x00 Server products for installation script, and then log in.
3. Enter the customer information, select Installation Script, and click Start Installation
script & IP Addr Admin. A script file is created and downloaded or e-mailed to you.

Preparing Needed Hardware

Laptop

To configure the Avaya G350 Media Gateway, you need to prepare a laptop with a serial port.
The laptop must have Internet Explorer installed. If you install a G350 without an S8300, you
must prepare the laptop with the following software:
Windows 2000 or Windows XP operating system
a TFTP server

Modem

In order to setup a remote configuration of the G350, you must prepare a USB modem.
Currently, the G350 supports the MultiTech USB modem, model MT5634ZBA-USB. If a USB
modem is not available, you can also use a serial modem.
10 Quick Start for Hardware Installation Avaya G350 Media Gateway