Preparing The G350 With An S8300 For A Remote Configuration - Avaya G350 Quick Start For Hardware Installation

7. If you have a software update (patch) file for Communication Manager, use the Install
Update page to select the file and update the software.
8. If you are not using IW to generate basic translations, select the Translation will be added
after the installation option on the Translation Source page.
9. On the Security File page, load the License file that you prepared from your laptop.
Note:
As of Communication Manager Release 3.1, the Avaya IW no longer requires the
Note:
inclusion of the FEAT_DADMIN login permissions in the license in order to
generate basic translations. However, for Business Partners, the license may still
include the FEAT_DADMIN login permissions. If the license does include the
FEAT_DADMIN login permissions, and you are using IW to generate basic
translations, initially you load a license file with the DADMIN feature enabled. At
the conclusion of the Avaya IW configuration, you load a second license file with
the DADMIN feature disabled.
10. On the Media Gateway IP Address page, click
11. On the Firmware page, upgrade G350 and Media Module firmware. New firmware files can
be loaded from your laptop directly into the Media Server /tftpboot directory, if needed.
12. On the Authentication File page, load the Authentication file that you prepared from your
laptop.

Preparing the G350 with an S8300 for a remote configuration

If you need to prepare the G350 with an S8300 for a remote configuration, you must attach and
enable a modem.
To prepare the G350 with an S8300 for a remote configuration:
1. Connect a USB modem to one of the USB ports on the S8300 Media Server.
2. From the Integrated Management Main Menu select Launch Maintenance Web Interface
(see Figure 8: Integrated Management Main Menu
3. Use the Maintenance Web Pages to enable the modem.
4. To ensure that the modem is enabled correctly, setup a dialup connection on a remote PC
with the following settings:
Automatically detect settings.
●
No Username, Password, or Domain.
●
Security > Show Terminal Window.
●
5. Dial in to the modem from the remote PC.
Preparing a G350 with an S8300 Media Server
to configure the G350.
on page 28).
Issue 4 February 2006 29