Figure 3: Attaching a mounting bracket with cable guides
Attaching Mounting Brackets
Follow these steps to attach the mounting brackets:
1. Position a bracket over the desired mounting position.
2. Affix the bracket to the chassis with three flat head 3/8 in. screws.
3. Tighten the screws with the screwdriver.
Mounting the G350
Follow these steps to mount the G350:
1. Position the G350 in the rack. Ensure that there is adequate ventilation.
2. Verify that the screw holes are aligned with the rack hole positions.
3. Insert two mounting screws on each side.
4. Tighten the mounting screws. Do not overtighten the screws.
5. Verify that ventilation vents are not obstructed.
Mounting in a Rack
Issue 3 June 2005
19