Preparing The G350 With An S8300 For A Remote Configuration - Avaya G350 Quick Start For Hardware Installation

8. On the Phone Message Files screen, you can install standard and custom phone message files.
9. On the Media Server - IP Addresses screen, enter IP information for the S8300.
10. If you selected the Install this media server as an LSP option in the Usage Options screen, the
LSP Controller screen appears. Enter the primary controller IP addresses for registration and
synchronization.
11. You can configure optional services: Uninterruptible Power Supply (UPS), Domain Name Service
(DNS), Network Time Protocol (NTP), or INADS remote support.
12. If you are not using IW to generate basic translations, select the Translation will be added after the
installation option on the Translation Source screen.
13. On the Security File screen, load the CM License file that you prepared from your laptop.
14. On the IP Addresses screen, click
a. To specify the details of the Primary Management Interface of the G350, use the PMI screen.
b. To specify SNMP community strings and trap destinations, use the SNMP screens.
c. To specify the Media Gateway Controller(s) used to manage the G350, and the Transition
Point information, use the MGC List screen. Click Ping Test to test the accessibility of each
MGC.
15. On the Firmware screen, upgrade G350 and Media Module firmware. New firmware files can be
loaded from your laptop directly into the server /tftpboot directory, if needed.
16. Use the Change Master Key - Optional screen to optionally change the master key which is used to
encrypt gateway secrets (passwords, etc.) in the gateway configuration file.
17. If you will be using the VPN feature, use the Gateway License screen to install the gateway license file.
18. If you have a service contract, use the Gateway Authentication screen to install the gateway
Authentication file that you prepared on your laptop.
19. On the TFTP Server screen, configure the media gateway TFTP server capability to upload IP Phone
configuration files.
20. You can configure the modem in the modem configuration screens.
21. If you selected the option Use this wizard to create basic translations in the Translation Source
screen, you can configure Telephony, Trunking, and Endpoints.
22. Optionally configure alarming for the modem, OSS alarming, and SNMP alarming.
23. Optionally change the root password on the media gateway.
24. On the Authentication File screen, load the CM authentication file that you prepared from your laptop.

Preparing the G350 with an S8300 for a remote configuration

If you need to prepare the G350 with an S8300 for a remote configuration, you must attach and enable a
modem.
1. Connect a USB modem to one of the USB ports on the S8300 Server.
2. From the Integrated Management Main Menu select Launch Maintenance Web Interface.
to configure the following information for the G350:
Preparing a G350 with an S8300 Server
Issue 6 January 2008 23