Preparing License Files; Preparing The G350 Serial Number - Avaya G350 Quick Start For Hardware Installation

Media gateway

Hide thumbs Also See for G350:

Table of Contents

Preparing License Files

If you install a G350 with an S8300 Media Server, you need license and authentication files to

complete the configuration. Browse to

files you need are:

For an S8300 configured as a primary controller, one license file.

If you are using the Avaya Installation Wizard to generate basic translations on an S8300

primary controller, you need to generate two license files:

Generate one license file with FEAT_DADMIN turned on by selecting FEAT_DADMIN on

the RFA Features screen.

Generate a second license file with FEAT_DADMIN turned off by clearing the

FEAT_DADMIN selection on the RFA Features screen. The Modify System Record

function is used to create the second license file. This step is not required for installations

completed by Avaya authorized dealer technicians.

Note:

Each license file must be labeled carefully because the files will be used at

Note:

different points in the installation process.

The password (authentication) file.

For detailed information about license and authentication files, see the RFA Users Guide,

03-300149.

In order to create the license file, you need the serial number of the G350. The serial number is

printed on a sticker on the back of the G350 chassis.

http://rfa.avaya.com

to download the needed files. The

Preparing License Files

Issue 3 June 2005

Table of Contents