Proximus Forum 500 User Manual page 77

The Menus
(default: 20 seconds). Then select whether internal calls, external calls or all
calls should be forwarded to the destination number. Activate call forwarding
with . Active call forwarding is indicated by a "+" sign. This is followed by the
on
call forwarding destination.
Note: All calls for the call numbers of your telephone are forwarded. If
a number is stored on more than one telephone, then calls made
to any of the other telephones will be forwarded as well.
: "Divert MSN" is available for ISDN multi-terminal accesses. For
Divert MSN
each MSN you can use this form of call forwarding to forward incoming
external calls to external destinations. Several MSNs can be grouped
together (this is configured by the system administrator) and forwarded to a
common destination number.
The display indicates a list of the configured MSNs and MSN groups. Select an
entry. Then select
Then key in the external destination number and activate the function. Active
call forwarding is indicated by a "+" sign. This is followed by the call
forwarding destination. A "?" preceding the entry,
means that call forwarding is active for some MSNs or that there are different
call forwardings activated for this group.
Note: For this type of call forwarding, the (external) destination
number is always entered without the trunk line seizure code
digit. If "Divert MSN" is executed in the exchange (= external call
forwarding, configured by the system administrator), it can take
a few seconds after configuration for call forwarding to be acti-
vated in the exchange.
: With this type of call forwarding, all calls signalled by the
Divert door
doorbell are forwarded. If several doorbells are configured on the communi-
cations system, first select the doorbell whose calls are to be diverted. How
many door bells are available, depends on the type of entrance intercom.
Consult your system administrator if you have questions concerning the
configuration of the door bells. Then key in the call forwarding destination
(please refer to the chapter entitled Making External/Internal Calls starting
on page 38). Activate call forwarding with
cated by a "+" sign. This is followed by the call forwarding destination.
: This function allows you to configure call forwarding for the
Remote divert
phone numbers of other Forum 500 / Forum 5000 users. Programming call
,
Immediately After delay
Features and Menus
or for the forwarding mode.
Busy
? MSN Group 1
. Active call forwarding is indi-
On
for example,
75