Proximus Forum 500 User Manual page 68

Telephoning
If you add the entry to the central phone book, you can assign a speed-dialling
number. Select
Abbrev. no.
You can accept this number or enter another one which is not in use. Confirm
OK .
with
You can define whether or not your own call number is automatically trans-
mitted if you call this call number. Select
OK . Select one of the following options and confirm the selection with the
OK softkey:
●
Default : You can decide before calling this call number whether or not
your call number is to be transmitted or not (refer to the "Selection" Menu
in the Idle State starting on page 36 chapter also).
●
yes : Your call number is always displayed.
● : Your call number is always suppressed.
no
As necessary – just like in the two previous steps – enter additional call
numbers ( and
Mobile
Then select the default number (
private ) and confirm with
you do not select any other number before establishing the connection.
OK to save the entry.
Press
Add phone number to a phone book entry
Select and press
Add
, ,
Personal Central
book. If your system administrator has authorised you (or the user group you
are part of) accordingly, you can also edit the central phone book and your
company's phone book. Select the desired phone book and press
In the relevant phone book, select the entry you would like to add a number to
(please also refer to the explanations under "Look up name" in the section
entitled "Phone book" Menu starting on page 63).
, ,
Office Mobile Private
be saved as. Confirm with
Note: If you want to edit phone book entries (to change the name or
number, for example), use the "Phone book" menu (see also
"Phone book" Menu starting on page 88).
66
The system will offer a speed-dialling number.
), confirm with
Private
Default office
OK . The default number is the number that is used if
OK .
: You can add the entry to your personal phone
Company
: Define the kind of phone number the list entry should
OK .
Making Calls from the Telephone Book
and confirm with
Transmit number
Ok softkey respectively.
,
Default mobile
or
Default
OK .