Content Filtering - Cradlepoint IBR600 Product Manual

IBR600| USER MANUAL Firmware ver. 4.0.2
CRADLEPOINT

6.1 Content Filtering

You have two main options for filtering
content in a network created through
your IBR600/IBR650.
1) Domain / URL Filter Rules:
Create a list of websites that will
be either disallowed
(facebook.com, for example) or
allowed exclusively (your
company's website, for example).
2) OpenDNS Content Filtering:
Allows several options for filtering
rules.
To create Domain / URL Filter Rules, simply input one or more website domain names or URLs. By default, these
websites will be disallowed as part of a Blacklist. You can change this to a Whitelist to exclusively allow these sites.
Enable Whitelist: By default, Domain / URL filters allow you to block access from your network to any external domain or
website. Enabling this as a Whitelist instead will allow access to only those sites in the list, blocking all other websites.
Some sites use multiple domains, so each of them would need to be added to the list to get full site functionality. The
default behavior enables the Whitelist for URLs only. Select Filter by IP Addresses to use IP addresses with the Whitelist.
Filter by IP Addresses: Enabling this will cause the router to block/allow URLs by the IP addresses they point to. This
option will also force all DNS traffic through the router to ensure the correct IP address is returned during a DNS lookup.
Using IP address filtering with URLs is not recommended. Some URLs do not return all valid IP addresses with DNS,
so these may be missed. Another possible problem is that example.com and www.example.com refer to the same website
but may return different IP addresses.
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 58