Cradlepoint IBR600 Product Manual page 154

IBR600 | USER MANUAL Firmware ver. 4.0.2
CRADLEPOINT
System Logging
8.1.7
Enable Logging to a Syslog Server: Enabling this option will send log messages to a specified Syslog server. After
enabling, type the Hostname or IP address of the Syslog server (or select from the dropdown menu).
Syslog Server Address: Select the Hostname or IP address from the dropdown menu, or type this in manually.
Include System ID: This option will include the router's "System ID" at the beginning of every log message. This is often
useful when a single remote Syslog server is handling logs for several routers.
Include UTF8 Byte Order Mark: The log message is sent using UTF-8 encoding. By default the router will attach the
Unicode Byte Order Mark (BOM) to the Syslog message in compliance with the Syslog protocol, RFC5424. Some Syslog
servers may not fully support RFC5424 and will treat the BOM as ASCII text, which will appear as garbled characters in
the log. If this occurs, disable this option.
Log to attached USB stick: Only enable this option if instructed by a CradlePoint support agent. This will write a very
verbose log file to the root level of an attached USB stick. Please disable the feature before removing the USB stick, or
you may lose some logging data.
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 152