Cradlepoint IBR600 Product Manual page 142

IBR600 | USER MANUAL Firmware ver. 4.0.2
CRADLEPOINT
DSCP (DiffServ): Differentiated Services Code Point is the successor to TOS (Type of Service). Use this field to select
traffic based on the DSCP header in each IP packet. This field is sometimes set by latency sensitive equipment such as
VoIP phones. If you know specific DSCP values, you can input one here.
DSCP Negate: When checked this rule will match on any packet that does NOT match the DSCP field.
Protocol: Select from the dropdown list to specify the protocol for a particular data use. Otherwise, leave "Any" selected.
 Any
 ICMP
 TCP
 UDP
 GRE
 ESP
 SCTP
Source IP Address, Source Netmask,
Destination IP Address, and Destination
Netmask: Specify an IP address or range of IP
addresses by combining an IP address with a
netmask for either "source" or "destination" (or
both). Source vs. destination is defined by traffic
flow. Leave these blank to include all IP
addresses (such as if your rule is defined by a
particular port instead).
EXAMPLE: If you want to associate this rule with your
guest LAN, you could input the IP address and
netmask for the guest LAN here (leaving the last slot
"0" to allow for any user attached to the guest
network):

Source IP Address: 192.168.10.0

Source Netmask: 255.255.255.0
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 140