Cradlepoint IBR600 Product Manual page 162

IBR600 | USER MANUAL Firmware ver. 4.0.2
CRADLEPOINT
RADIUS/UAM Settings
8.4.2
This section allows you to configure a RADIUS and
Universal Access Method server. After the user
accepts the terms, you can either let him/her
continue to the URL they were trying to reach or
you can force the user to go to a specified UAM
Server or URL once before continuing on.
RADIUS settings:
 Server Address 1: Assigned by RADIUS
service.
 Server Address 2: This is an optional
backup server.
 Authentication Port: The standard port
number, 1812, will usually be sufficient.
 Accounting Port: The standard port number, 1813, will usually be sufficient.
 Shared Secret: Assigned by RADIUS service.
 Redirection On Successful Authentication: Choose from the dropdown list of options for redirection:
o Redirect to the UAM Server.
o Redirect to the URL that the user intends to visit.
o Redirect to the following URL (input the desired URL).
 Session Timeout: (Default: 60 minutes.) The amount of time the user may use the router before being forced to
authenticate again. This value can be overwritten by the RADIUS server.
 Idle Timeout: (Default: 15 minutes.) If the user is idle for this amount of time, make them re-authenticate.
 Bandwidth (upload): (Default: 512 Kbits/sec.) The data rate limit for users uploading data through the hotspot.
 Bandwidth (download): (Default: 1024 Kbits/sec.) The data rate limit for users downloading data through the
hotspot.

© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 160