Cradlepoint IBR600 Product Manual page 119

IBR600 | USER MANUAL Firmware ver. 4.0.2
CRADLEPOINT
bandwidth. This is a best effort to keep all interfaces with these rules at a similar percentage utilization of data (e.g. 10%,
50%, 90%) as the cycle progresses, rather than quickly using 100% of a fast 1GB capped interface while using only a
fraction of a slow 10GB capped interface, thus leaving the rest of the cycle with only the slow interface. The Data Usage
algorithm on the Load Balancing page must be selected or this checkbox has no effect.
Click Next to continue to page 2.
Data Usage Rule – page 2
Cycle Type: How often the
rule will reset. The data usage
amount will be reset at the end
of each cycle. Select the
length of a cycle from a
dropdown menu with the
following choices:
 Daily
 Weekly
 Monthly
Cycle Start Date: Select the date you wish the rule to begin.
This date will be used to track when the rule will be reset.
Shutdown WAN on Cap: If selected, the WAN device will shut down when the assigned usage is reached. A cycle reset
or a rule deletion will re-enable the device.
Send Alert on Cap: An email alert will be generated and sent when the assigned usage is reached.
WARNING: The SMTP mail server must be configured in System Settings → Device Alerts.
Custom Alert: When checked you enable a second email to be configured for a percentage of the assigned usage.
Percent of Usage (1-1000): If selected, a custom alert will be sent when your data usage reaches this percentage of your
usage cap. For example, you could set this at 90 percent so that you know when your usage is nearing 100 percent of the
cap.
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 117