Cradlepoint IBR600 Product Manual page 14

IBR600 | USER MANUAL Firmware ver. 4.0.2
CRADLEPOINT
2.2.1 Attaching the COR to the Mounting Bracket
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
1) Attach the bracket to the wall or other surface with screws.
NOTE: Screws are not provided because the type of screw required
depends on the mounting surface.
2) Place the router's edge
against the bottom of the
bracket.
3) Press the router down
firmly, then push it inside
the bracket. It should
latch.
FOR MORE HELP AND RESOURCES PAGE 12