IBR600 | USER MANUAL Firmware ver. 4.0.2
CRADLEPOINT
GPS
8.1.5
If you have an attached device with GPS support, you can enable a graphical view of your router's location which will
appear in Status → GPS.
Users can configure GPS NMEA GGA format sentence reporting, available through a router-based server and/or a remote
server.
NOTE: Some carriers disable GPS support in otherwise supported modems. If you encounter issues with obtaining a fix, contact your carrier and
ensure that GPS is supported.
Enable GPS support: Enables support for querying GPS information from supported modems.
Active GPS: Keep the GPS receiver active at all times, even if no destination exists for position messages. This
will place additional load on the router similar to sending reports to a remote server, but without consuming the
network bandwidth.
© 2012 CRADLEPOINT, INC.
PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 148