Cradlepoint IBR600 Product Manual page 147

IBR600 | USER MANUAL Firmware ver. 4.0.2
CRADLEPOINT
System Clock
8.1.2
Enabling NTP will tell the router to get its system time from a remote server on the Internet. If you do not enable NTP then
the router time will be based on when the router firmware was built, which is guaranteed to be wrong. Whenever the
Internet connection is re-established and once a week thereafter the router will ask the server for the current time so it can
correct itself.
You then have the option of selecting an NTP server and adjusting the NTP server port. Select the NTP server from the
dropdown list. Any of the given NTP servers will be sufficient unless, for example, you need to synchronize your router's
time with other devices in a network.
Time Zone: Select from a dropdown list. Setting your Time Zone is required to properly show time in your router log.
Daylight Savings Time: Select this checkbox if your location observes daylight savings time.
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 145