Cradlepoint IBR600 Product Manual page 165

IBR600 | USER MANUAL Firmware ver. 4.0.2
CRADLEPOINT
LAN port #: Use the LAN port # field to configure the LAN port number you wish to access SNMP services on. (Default:
161)
Enable SNMP on WAN: Enabling SNMP on WAN will make SNMP services available to the WAN interfaces of the router.
WAN port #: Use the WAN port # field to configure which publicly accessible port you wish to make SNMP services
available on. (Default: 161)
SNMPv1: SNMP version 1 is the most basic version of SNMP. SNMPv1 will configure the router to transmit with settings
compatible with SNMP version 1 protocols.
SNMPv2c: SNMP version 2c has the same features as v1 with some additional commands. SNMPv2c will configure the
router to use settings and data formatting compatible with SNMP version 2c.
SNMPv3: SNMP version 3 includes all prior features with security available. SNMPv3 is the most secure setting for
SNMP. If you wish to configure traps then you must use SNMP version 3.
Get community string: The "Get community string" is used to read SNMP information from the router. This string is like a
password that is transmitted in regular text with no protection.
Set community string: The "Set community string" is used when writing SNMP settings to the router. This string is like a
password. It is a good idea to make it different than the "Get community string."
SNMPv3
8.5.2
If you select SNMPv3, you have several
additional configuration options for added
security.
Authentication type: Select the
authentication and encryption type that will
be used when connecting to the router from
the following dropdown list. These settings
must match the configuration used on any
SNMP clients.
 MD5 with no encryption
 SHA with no encryption
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 163