Cradlepoint IBR600 Product Manual
  1. Manuals
  2. Brands
  3. Cradlepoint Manuals
  4. Network Router
  5. COR IBR600
  6. Product manual

Cradlepoint IBR600 Product Manual

Cor integrated broadband router
Hide thumbs Also See for IBR600:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Product Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IBR600 and is the answer not in the manual?

Questions and answers

Related Manuals for Cradlepoint IBR600

Summary of Contents for Cradlepoint IBR600

  • Page 2: Manual Revisions

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Preface CradlePoint reserves the right to revise this publication and to make changes in the content thereof without obligation to notify any person or organization of any revisions or changes. Manual Revisions...

  • Page 3: Table Of Contents

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Table of Contents 1 INTRODUCTION ..............3 5.5 H (IBR600) ..........40 OTSPOT LIENTS 5.6 I ............41 NTERNET ONNECTIONS 1.1 P ............. 3 ACKAGE ONTENTS 5.7 S ................. 51 TATISTICS 1.2 S ............
  • Page 4 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 8.2 D ..............154 EVICE LERTS 8.3 GPIO C ............156 ONNECTOR 8.4 H (IBR600) ..........158 OTSPOT ERVICES 8.5 M ASK YOUR CRADLEPOINT SALES ANAGED ERVICES REPRESENTATIVE FOR DETAILS ..........162 8.6 S...

  • Page 5: Introduction

     At least one Internet source: an active subscription for the embedded modem; an Ethernet-based modem; or WiFi as WAN  Windows 2000/XP/7, Mac OS X, or Linux computer (with WiFi adapter for IBR600 WiFi functionality)  Internet Explorer v6.0 or higher, Firefox v2.0 or higher, Safari v1.0 or higher 1.3 IBR600/IBR650 Overview...
  • Page 6 (4G LTE, 3G EVDO, WiMAX, HSPA+, LTE/HSPA+) modem as well as support for wired networks such as DSL or Cable. With its compact size, sleek metal case and mounting bracket, and external Cellular antennas, CradlePoint COR is ideal for use in high-availability portable or fixed applications (ATM, kiosk, surveillance, vehicle). With failover/failback capability, COR supports both wired and wireless Internet.
  • Page 7 CradlePoint’s cloud-based router management service allows for remote monitoring, configuration, and firmware updates of deployed routers like the IBR600 or IBR650. WiPipe Central drastically simplifies router administration for businesses using multiple routers. WiPipe Central can be purchased separately at http://cradlepoint.com/support/wipipe-central.

  • Page 8: Hardware Overview

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 2 HARDWARE OVERVIEW © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 6...

  • Page 9: Ports, Leds, And Switches

    Reset button. This button is recessed, so it requires a pointed object such as a paper clip to press. Press and hold for 10 seconds to initiate reset. Ethernet Ports: By default, the IBR600/IBR650 has one WAN (Wide Area Network— your Internet source) port and one LAN (Local Area Network) port. Each of these ports can be reconfigured, however, if you need two LAN or two WAN Ethernet ports.
  • Page 10 Micro USB: This port can be used to attach a direct firmware upgrade to enable manual firmware upgrades if necessary. WiFi Antennas (IBR600 only): The IBR600 comes with two 2.4 GHz WiFi antennas (Reverse SMA). These antennas are simple to attach and adjust for maximum WiFi broadcast.
  • Page 11 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Modem Antennas: The CradlePoint COR comes with two modem antennas to enhance reception for the embedded modem. These antennas are simple to attach and adjust. Power On/Off:  I = On  O = Off Power LED: ...
  • Page 12 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT WiFi LED:  Green = On and operating normally  No light = Off Modem LED:  Green = On and operating normally  Blinking Green = Connecting  Amber = Not available (idle, for example) ...

  • Page 13: Mounting Bracket

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 2.2 Mounting Bracket © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 11...
  • Page 14 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 2.2.1 Attaching the COR to the Mounting Bracket 1) Attach the bracket to the wall or other surface with screws. NOTE: Screws are not provided because the type of screw required depends on the mounting surface.
  • Page 15 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 2.2.2 Removing the COR from the Mounting Bracket From the top of the bracket, press down firmly on the router using your thumb(s) and pull the device out. © 2012 CRADLEPOINT, INC.

  • Page 16: Quick Start

    3.1.1 A wireless broadband data plan must be added to your IBR600/IBR650. Wireless broadband data plans are available from wireless carriers such as AT&T, Sprint, and Verizon. A new line of service can be added or a data plan can be transferred from an existing account.

  • Page 17: Connect To A Computer Or Other Device

    NOTE: If more than one IBR600 wireless router is visible, you can find the correct unit by checking for its SSID (service set identifier; the unique name of the local network). The default SSID of the primary network has the form IBR600-xxx, where “xxx” is the last 3 digits of the router’s MAC address.
  • Page 18 Accessing the Administration Pages For most users the IBR600/IBR650 can be used immediately without any special configuration changes. If you would like to change your network name or password or configure any of the advanced features of your router, you will need to log in to the administration pages: ...
  • Page 19 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 3.2.3 Connect to the Internet (IBR600) If you used the First Time Setup Wizard, you might have changed the “WiFi Network Name” or the “Security Mode” password. If so, you will need to reconnect your device(s) to the IBR600 network.

  • Page 20: Common Problems

    A wireless broadband data plan must be added to your IBR600/IBR650. Wireless broadband data plans are available from wireless carriers such as AT&T, Sprint, and Verizon. A new line of service can be added or a data plan can be transferred from an existing account.

  • Page 21: Web Interface -- Essentials

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 4 WEB INTERFACE -- ESSENTIALS The CradlePoint COR has a Web interface for configuration and administration of all features. The interface is organized with 5 tabs at the top of the screen:  Getting Started ...

  • Page 22: Administrator Login

    The Administrator Login page will appear. Log in using your administrator password. Initially, this password can be found on the bottom of the IBR600/IBR650 unit as the Default Password. This password is also the last eight digits of the unit’s MAC address.
  • Page 23  Name: The name of the primary network. If you have more than one wireless network enabled, the additional network names will also be listed here. Modem Details  Manufacturer: The name of the modem manufacturer (CradlePoint).  Model: The name of the modem model (Internal LTE, for example).  Signal: The strength of the signal (dBm).

  • Page 24: Getting Started - First Time Setup

    The First Time Setup Wizard will help you customize the name of your wireless network, change passwords to something you choose, and establish an optimal WiFi security mode. The CradlePoint COR comes out of the box with a unique password at WPA1/WPA2 WiFi security level.
  • Page 25 The router cannot use 802.11n modes if WEP is enabled; WiFi performance and range will be limited.  NONE (OPEN): Select this option if you do not want to activate any security features. CradlePoint recommends BEST (WPA2) WiFi security. Try this option first and switch only if you have a device that is incompatible with WPA2.
  • Page 26 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Choose a personalized WPA PASSWORD or WEP KEY. This password will be used to connect devices to the router’s WiFi broadcast once the security settings have been saved.  WPA Password: The WPA Password must be between 8 and 64 characters long. A combination of upper and lower case letters along with numbers and special characters is recommended to prevent hackers from gaining access to your network.
  • Page 27 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 8) Configuring Failure Check: It is possible for a WAN interface to go down without the router recognizing the failure. (For example: the carrier for a cellular modem goes dormant, or your...
  • Page 28 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 9) Configuring Your Access Point Name (APN): If you are using a SIM-based modem (LTE/GSM/HSPA) with your CradlePoint router you may need to configure the APN before it will properly connect to your carrier. Wireless carriers offer several APNs, so check with your carrier to confirm the appropriate one to use.
  • Page 29 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 10) Review the details and record your wireless network name, administrative password, and WPA password (or WEP key). Move your mouse over the passwords to selectively reveal each password. Please record these settings for future access. You may need this information to configure other wireless devices.

  • Page 30: Quick Links

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 4.3 Quick Links The CradlePoint logo in the upper left-hand corner of all the administration pages is a link to the Dashboard (Status → Dashboard), which displays fundamental information about the router.

  • Page 31: Configuration

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 4.4 Configuration Pages The following table shows the navigation layout of the administration pages. Click on the tabs along the top bar to reveal the following dropdown menus. Items particular to WiFi are not available on the IBR650.
  • Page 32 LAN (Local Area Network) Examples:  If you want to change the content filtering settings for the network created by the IBR600/IBR650, go to the Network Settings tab.  If you have multiple Internet sources (such as the embedded modem and an Ethernet connection) for which you would like to set priority levels, go to the Internet tab.

  • Page 33: Ip Passthrough Setup

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 4.5 IP Passthrough Setup You can quickly enable IP Passthrough with the IP Passthrough Setup Wizard available under Getting Started → IP Passthrough Setup. IP Passthrough takes a 3G/4G WAN data source and passes the IP address through to Ethernet LAN.

  • Page 34: Status

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 5 STATUS The Status tab displays information about many different aspects of the router. It provides access to 10 submenu options:  Client List  Dashboard  GPS  GRE Tunnels  Hotspot Clients ...

  • Page 35: Client List

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 5.1 Client List The Client List displays the specifications of each device connected to your router, including Wireless and Wired clients. Wireless Clients. For each device using a wireless connection to your IBR600, the following information is displayed: Hostname, IP, MAC, Connection, and Time Online.
  • Page 36 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT  -26 dBm: A relative measure of wireless signal quality (decibels relative to one milliwatt). This expresses theoretical best quality. The value is given as a negative exponent: -20 is a very good value while -80 is relatively poor.

  • Page 37: Dashboard

    After the initial setup of the router, every time you log in you will automatically be directed to this Dashboard. Also, you can click on the CradlePoint logo in the upper left-hand corner to return to the Dashboard from any page.
  • Page 38 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Router Information: “Detailed Info” links to System Settings → Administration.  Product: IBR600/IBR650  Serial: The product serial number.  Firmware: Gives the number of the current firmware version.  Build Date: Year-month-day-hours-minutes-seconds for the most recent firmware upgrade.
  • Page 39 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Local Networks: “Detailed Info” links to Network Settings → WiFi / Local Networks.  Clients: The number of current clients. For each network, the following information is displayed:  Network Name: IP Address/Netmask o Route Mode: NAT (Network Address Translation), Standard (NAT-less), Hotspot, or Disabled.

  • Page 40: Gps

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 5.3 GPS If GPS support is enabled and a modem capable of providing GPS coordinates is connected, this page will show a graphical view of your router's location. See the GPS section in System Settings →...

  • Page 41: Unnels

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 5.4 GRE Tunnels View the status of configured GRE Tunnels. To set up or edit a GRE tunnel, go to Internet → GRE Tunnels. Included information:  Name  Status  Transmit (packets/bytes) ...

  • Page 42: Hotspot Clients (Ibr600)

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 5.5 Hotspot Clients (IBR600) View the status of the clients that have logged in through the Hotspot/Captive Portal. View:  Hostname  IP address  MAC address  Data Usage (both IN and OUT) ...

  • Page 43: Internet Connections

    The Internet Connections submenu option provides a list of attached WAN devices used as the Internet source for the IBR600/IBR650. Select one of these devices to see detailed information about that particular device. For each type of device, different information will be included in the Device Information section. Possible devices include: ...
  • Page 44 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 5.6.1 Ethernet General Information  Unique Identifier wan  Model  Type ethernet  Port IP Information  DNS Servers  IP Address  Gateway Statistics  Incoming Bytes  Outgoing Bytes ...
  • Page 45 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 5.6.2 WiFi as WAN Diagnostics  Connection State (connected, idle, etc.) General Information  Product Wireless As WAN  Unique Identifier  Type wwan IP Information  Netmask  IP Address  Gateway ©...
  • Page 46 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 5.6.3 EVDO Modem (embedded modem) Diagnostics  Signal Strength (dBm)  PRL Version  Service Display 1xEV-DO,1X  Carrier Status UP or DOWN  Connection Type CDMA  Connection State (connected, idle, etc.) ...
  • Page 47 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 5.6.4 LTE: Internal LTE/EVDO Diagnostics  Signal Error Rate  MN-HA SPI  Modem Firmware Version  Battery Status  CGSN  MN-HA SS  Network Address Identifier (NAI)  SINR  Service Display LTE ...
  • Page 48 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT General Information  Unique Identifier  Port int1  Profile 3 VZWINTERNET  Model Internal LTE/EVDO  Type lte IP Information  DNS Servers  IP Address  Gateway Statistics  Incoming Bytes ...
  • Page 49 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Internal LTE/HSPA+ 5.6.5 Diagnostics  Signal Error Rate  Modem Firmware Version  Battery Status  CGSN  Service Display HSPA  Carrier Status  MDN  PIN Status  ESN/IMEI  Product Internal LTE/HSPA+ ...
  • Page 50 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT  Gateway Statistics  Incoming Bytes  Outgoing Bytes  Connection Uptime (secs) © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 48...
  • Page 51 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 5.6.6 Internal HSPA+ Diagnostics  Product Internal HSPA+  Modem Firmware Version  DEFPDP  Model Internal LTE/EVDO  Manufacturer CradlePoint Inc.  Carrier ID  Service Display HSPA  Signal Strength (dBm) ...
  • Page 52 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT IP Information  DNS Servers  IP Address  Gateway Statistics  Incoming Bytes  Outgoing Bytes  Load Balance score  Connection Uptime (secs) © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/...

  • Page 53: Statistics

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 5.7 Statistics The Statistics submenu option displays basic traffic statistics. Wireless Statistics: View the signal strength and other wireless modem information. The wireless device’s signal strength will only be displayed as long as it supports “Live Diagnostics.” Sample rate and size can be adjusted from the dropdown boxes.
  • Page 54 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Data Usage: A measure of amount of information that is currently being sent or received through the network. Sample rate and size can be adjusted from the dropdown boxes. © 2012 CRADLEPOINT, INC.
  • Page 55 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Failover/Failback/Load Balance: An easy way to view current connective states of the devices plugged into the router as compared to the past. Sample rate and size can be adjusted from the dropdown boxes.

  • Page 56: System Logs

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 5.8 System Logs The router automatically logs (records) events of possible interest in its internal memory. If there is not enough internal memory for all events, logs of older events are deleted, but logs of the latest events are retained. The log options allow you to filter the router logs so you can easily find relevant messages.

  • Page 57: Vpn Tunnels

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 5.9 VPN Tunnels View the status of configured VPN tunnels. To set up or edit a VPN tunnel, go to Internet → VPN Tunnels. Included information:  Name  Connections  Status ...

  • Page 58: Wipipe Qos

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 5.10 WiPipe QoS View the breakdown of packets and bytes sent and received associated with each WiPipe QoS rule. © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 56...

  • Page 59: Network Settings

    6 NETWORK SETTINGS The Network Settings tab provides access to 8 submenu options for administering the following functions/tasks. These functions are all related to controlling the LAN (Local Area Network), the network you set up with the IBR600/IBR650.  Content Filtering ...

  • Page 60: Content Filtering

    IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 6.1 Content Filtering You have two main options for filtering content in a network created through your IBR600/IBR650. 1) Domain / URL Filter Rules: Create a list of websites that will be either disallowed (facebook.com, for example) or...
  • Page 61 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT OpenDNS 6.1.1 OpenDNS is a service that protects you online by filtering websites. OpenDNS protects you from phishing websites and URL typos. Enter your OpenDNS account information in order to use your OpenDNS Content Filtering settings.

  • Page 62: Dhcp Server

    IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 6.2 DHCP Server DHCP stands for Dynamic Host Configuration Protocol. The built-in DHCP server automatically assigns IP addresses to the computers and other devices on each local area network (LAN). In this section you can view a list of assigned IP addresses and reserve IP addresses for particular devices.

  • Page 63: Dns

    DNS, or Domain Name System, is a naming system that translates between domain names (www.cradlepoint.com, for example) and Internet IP addresses (206.207.82.197). A DNS server acts as an Internet phone book, translating between names that make sense to people and the more complex numerical identifiers. The DNS page for the IBR600/IBR650 has these distinct functions: ...
  • Page 64 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Dynamic DNS Configuration 6.3.2 The Dynamic DNS feature allows you to host a server (Web, FTP, etc.) using a domain name that you have purchased (www.yourname.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP addresses.
  • Page 65 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Advanced Dynamic DNS Settings 6.3.3 Update period (hours). (Default: 576) The time between periodic updates to the Dynamic DNS, if your dynamic IP address has not changed. The timeout period is entered in hours so valid values are from 1 to 8760.

  • Page 66: Firewall

    IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 6.4 Firewall The router automatically provides a firewall. Unless you configure the router to the contrary, the router does not respond to unsolicited incoming requests on any port, thereby making your LAN invisible to cyber attackers.
  • Page 67 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT  Local Port(s): The port number(s) that corresponds to the service (Web server, FTP, etc) on a local computer or device. For example, you might input “80” in the Local Port(s) field to open a port for a Web server on a computer within your network.
  • Page 68 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT IP Filter Rules (Advanced) 6.4.2 An "Incoming" IP filter rule restricts remote access to computers on your local network. "Outgoing" filter rules prevent computers on your local network from initiating communication to the address range specified in the rule.
  • Page 69 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT is NOT in the specified port range.  Port(s): Use for a single port or a range of ports. Fill in the left side for a single port. Use Network IP, Netmask, and Port(s) to specify the ports and addresses for which the rule applies. You can specify a range of ports or a single port.
  • Page 70 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT DMZ: DeMilitarized Zone (Advanced) 6.4.3 A DMZ host is effectively not firewalled in the sense that any computer on the Internet may attempt to remotely access network services at the DMZ IP address. Typical uses involve running a public Web server or sharing files.
  • Page 71 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT  IRC: For Direct Client to Client (DCC) transfer when using Internet Relay Chat. You may wish to forward TCP port 113 for incoming identd (RFC 1413) requests. 6.4.5 Firewall Options (Advanced) Anti-Spoof: Anti-Spoof checks help protect against...
  • Page 72 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Remote Administration Access Control Editor IP Address: The IP address that will be allowed to access administrative services through the WAN. Netmask (Optional): The netmask allows you to specify what IP address sets will be allowed access. If this field is left empty a netmask of 255.255.255.255 will be used,...

  • Page 73: Mac Filter / Logging

    IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 6.5 MAC Filter / Logging A MAC (Media Access Control) address is a unique identifier for a computer or other device. This page allows you to manage clients by MAC address. You can filter clients by MAC addresses and/or keep a log of devices connected to your router.
  • Page 74 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT MAC Logging Configuration 6.5.2 Enable MAC Logging: Enabling MAC Logging will cause the router to log MAC addresses that are connected to the router. MAC addresses that you do not want to have logged (addresses that you expect to be connected) should be added to the “Ignored MAC Addresses”...

  • Page 75: Routing

    IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 6.6 Routing Add a new static route to the IP routing table or edit/remove an existing route. Static routes are unnecessary for most users. They are typically only used in networks with more than one layer, such as when there is a network within a network so that packet destinations are hidden behind an additional router.

  • Page 76: Wifi / Local Networks

    IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 6.7 WiFi / Local Networks This section is used to configure the settings for wireless networks created by your router. Note that changes made in this section may also need to be duplicated on wireless devices that you want to connect to your wireless network.
  • Page 77 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Local IP Networks 6.7.1 Local IP Networks displays the following information for each network:  Network Name  IP address/Netmask  DHCP Server (Enabled/Disabled)  Routing Mode (NAT, Standard, Hotspot, Disabled)  Access Control (Admin Access, UPnP Gateway, LAN Isolation) ...
  • Page 78 IP Settings: Name: This primarily helps to identify this network during other administration tasks. Hostname: [Default: cp (for CradlePoint)] The hostname is the DNS name associated with the router's local area network IP address. NOTE: You can access the router’s administration pages by typing the hostname into your browser, so if you change “cp”...
  • Page 79 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT  NAT: Network Address Translation hides private IP addresses behind the router's IP address. This is the simplest and most common choice for users, because NAT does the translation work for you.  Standard: NAT-less routing. If you select Standard, you must separately configure your IP addresses so that they will be publically accessible.
  • Page 80 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Access Control: Tune the access control settings of this network to match the intended use. Simply select or deselect any of the following:  LAN Isolation: When checked, this network will NOT be allowed to communicate with other local networks.
  • Page 81 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT DHCP Server: Changing settings for the DHCP server is optional. The default selections are almost always sufficient. DHCP Server: (Default: Enabled) When the DHCP server is enabled, users of your network will be able to automatically connect to the Internet without any special configuration.
  • Page 82 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT available. One of the more common uses is to assign a VoIP phone server using option 66 (Server name). © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 80...
  • Page 83 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Option: Select an option from the dropdown list or manually enter the number of an option. A complete list of options available from IANA. Value: Generally this field should be a string, IP address, or numeric value. Some fields can accept both IP addresses and hostnames—in these cases you may need to wrap this value in quotes.
  • Page 84 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Local Network Interfaces 6.7.3 Each LAN type—WiFi, Ethernet, and VLAN—has a separate section with configuration options. Unless the default configuration is sufficient, YOU MUST CONFIGURE EACH INTERFACE SEPARATELY in order to create the desired interface options for a network.
  • Page 85 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Wireless Network Editor WiFi Name (SSID): When you are browsing for available wireless networks, this is the name that will be broadcast from this router for the selected network. This name is referred to as the SSID (service set identifier). For security purposes, CradlePoint highly recommends that you change this from the pre-configured name.
  • Page 86 NOTE: If you don’t know whether you should choose Personal or Enterprise, assume Personal since you need to know RADIUS authentication for Enterprise. In order to protect your network from hackers and unauthorized users, CradlePoint highly recommends WPA2/AES for security if your attached devices can support it. WEP and WPA/TKIP are obsolete and have been replaced by WPA/AES.
  • Page 87 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT NOTE: If you select one of the security modes and are unable to connect to the router afterwards, you can use the reset buttons to reset the router to its factory default state and try a different security mode instead.
  • Page 88 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Ethernet Port Configuration Ethernet Port Configuration provides controls for your router’s Ethernet ports. There are two ports: one set as LAN and one set as WAN. While default settings will be sufficient in most circumstances, you have the ability to control: Mode (WAN or LAN) and Link Speed.
  • Page 89 Since the IBR600/IBR650 has only 2 Ethernet ports, this feature will rarely be necessary. It is possible, however, to set both ports as LAN ports (or both ports as WAN ports) and then either separate them or group them together.
  • Page 90 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT VLAN Interfaces A virtual local area network, or VLAN, functions as any other physical LAN, but it enables computers and other devices to be grouped together even if they are not physically attached to the same network switch.
  • Page 91 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT WiFi Settings 6.7.4 When you select the Wireless (WiFi) Networks Settings tab in the Local Network Interfaces section, you have several additional options for configuring your wireless LANs under the WiFi Settings heading.
  • Page 92 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Client Timeout: (Default: 300 seconds) If the access point is not able to communicate with the client it will disconnect after this amount of time in seconds. TX Power: Normally the wireless transmitter operates at 100% power. In some circumstances, however, there might be a need to isolate specific frequencies to a smaller area.
  • Page 93 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT  802.11 b  802.11 b/g  802.11 b/g/n  802.11 n Channel Width: Selects whether the router uses a single 20 MHz channel to send/receive, or uses two adjacent 20 MHz channels to create a 40 MHz channel. Higher performance is possible with the 40 MHz channel. Selecting Auto is generally best.

  • Page 94: Wipipe Qos

    IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 6.8 WiPipe QoS When WiPipe QoS (Quality of Service, also known as “Traffic Shaping”) is enabled, the router will control the flow of Internet traffic according to the user-defined rules. In other words, Traffic Shaping improves performance by allowing the user to prioritize applications.
  • Page 95 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Traffic Shaping Rules 6.8.1 A Traffic Shaping rule identifies a specific message flow and assigns a priority to that flow. Assign rules based on upload/download bandwidth, protocol, port numbers, and/or IP addresses. EXAMPLE: You can restrict the bandwidth of your guest network in order to reserve crucial bandwidth for your primary network. Create a rule associated with the IP address range and appropriate netmask for the guest network.
  • Page 96 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Traffic Shaping / QoS Rule Editor The first page of the Traffic Shaping / QoS Rule Editor allows you enable/disable the rule, name the rule, and specify a protocol for the rule. Rule Enabled: (Default: Enabled.) Deselect this to disable this rule.
  • Page 97 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Enable Upload QoS: (Default: Enabled.) Deselect if you want your rule to apply to download traffic only. Borrow Spare Bandwidth: (Default: Enabled.) When this is enabled, the interfaces/protocols associated with this rule will borrow unused bandwidth from other rules.
  • Page 98 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Enable Download QoS: (Default: Enabled.) Deselect if you want your rule to apply to upload traffic only. Borrow Spare Bandwidth: (Default: Enabled.) When this is enabled, the interfaces/protocols associated with this rule will borrow unused bandwidth from other rules.
  • Page 99 IBR600| USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Source Port(s) and/or Destination Port(s): Enter a port number between 1 and 65535. To enter a single port number, input the number into the left box. To enter a range of ports, fill in both boxes separated by the colon.

  • Page 100: Internet

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 7 INTERNET The Internet tab provides access to 6 submenu items for managing a variety of Internet connection options.  Connection Manager  Data Usage  GRE Tunnels  VPN Tunnels  WiFi as WAN / Bridge ...

  • Page 101: Connection Manager

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 7.1 Connection Manager The router can establish an uplink via the Ethernet WAN port, WiFi as WAN, or the internal modem. If the primary WAN connection fails the router will automatically attempt to bring up a new link on another device. This feature is called failover.
  • Page 102 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 7.1.2 Device Configuration Clicking on a device reveals the following information:  State (Connected, Available, etc.)  Port  UID (Unique identifier. This could be a name or number/letter combination.)  IP Address ...
  • Page 103 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 7.1.3 General Settings  Enabled: Select/deselect to enable/disable.  Force NAT: Normally NAT is part of the Routing Mode setting which is selected on the LAN side in Network Settings → WiFi / Local Networks. Select this option to force NAT whenever this WAN device is being used.
  • Page 104 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Failure Check (Advanced) If this is enabled, the router will check that the highest priority active WAN interface can get to the Internet even if the WAN connection is not actively being used. If the interface goes down, the router will switch to the next highest priority interface available.
  • Page 105 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Failback Configuration (Advanced) This is used to configure failback, which is the ability to go back to a higher priority WAN interface if it regains connection to its network. Usage: Fail back based on the amount of data passed over time.
  • Page 106 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Ethernet Settings 7.1.4 While default settings for each WAN Ethernet port will be sufficient in most circumstances, you have the ability to control:  Connect Method: DHCP (Automatic), Static (Manual), or PPPoE (Point-to-Point Protocol over Ethernet).
  • Page 107 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Static (Manual):  IP Address  Subnet Mask  Gateway IP  Primary DNS Server  Secondary DNS Server PPPoE:  Username  Password  Password Confirm  Service  Auth Type: None, PAP, CHAP ©...
  • Page 108 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Modem Settings 7.1.5 On Demand: Typically modem connections are not always on. When this mode is selected a connection to the Internet is made as needed. When this mode is not selected a connection to the Internet is always maintained.
  • Page 109 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Example: AT+CGDCONT=2,”IP”,”isp.cingular” ATCT*99***2# PPP Authentication Protocol: Set this only if your service provider requires a specific protocol and the Auto option chooses the wrong one.  Auto  PAP (Password Authentication Protocol) ...
  • Page 110 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT CDMA Settings These settings are usually specific for your wireless carrier's private networks. You should not set these unless directed to by a carrier representative. If a field below is left blank, that particular setting will not be changed in the modem. You should only fill in fields that are required by your carrier.
  • Page 111 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT SIM/APN Settings SIM PIN: PIN number for a GSM modem with a locked SIM. Access Point Name (APN): Some wireless carriers provide multiple Access Point Names that a modem can connect to. Some APN examples are ‘isp.cingular”...
  • Page 112 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT WiMAX Settings WiMAX Realm: Select from the following dropdown options:  Clear – clearwire-wmx.net  Rover – rover-wmx.net  Sprint 3G/4G – sprintpcs.com  Xohm –xohm.com  BridgeMAXX – bridgeMAXX.com  Time Warner Cable – mobile.rr.com ...
  • Page 113 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 7.1.6 Update/Activate a Modem Some modems can be updated and activated while plugged into the router. Updates and activation methods vary by modem model and service provider. Possible methods are: PRL Update, Activation, and FUMO. All supported methods will be displayed when you select your modem and click “Control”...
  • Page 114 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Process Timeout: If the process fails an error message will display. Activation has a 3-minute timeout, PRL update has a 4-minute timeout, and FUMO has a 10-minute timeout. 7.1.7 Configuration Rules (Advanced)
  • Page 115 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT WAN Configuration Rule This section allows you to create simple or complex rules that affect how individual Internet sources or classes of sources (perhaps all WiMAX modems or all modems from Sierra Wireless) behave in the router.
  • Page 116 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Value: If you chose Port or Type, select from the dropdown list. If you chose Manufacturer, Model, Serial Number, MAC Address, or Unique ID, you will need to manually input the information.

  • Page 117: Data Usage

    Agreement shown to the right. The purpose of this agreement is to ensure that you understand that the data numbers for the IBR600/IBR650 may not perfectly match those of your carrier: CradlePoint cannot be held responsible. You must accept the agreement by clicking Yes in order to begin creating data usage rules.
  • Page 118 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 7.2.1 Data Usage Rules The Date Usage Rule display shows basic information for each rule you have created (including rules created with a template). The following information is displayed:  Rule Name ...
  • Page 119 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT bandwidth. This is a best effort to keep all interfaces with these rules at a similar percentage utilization of data (e.g. 10%, 50%, 90%) as the cycle progresses, rather than quickly using 100% of a fast 1GB capped interface while using only a fraction of a slow 10GB capped interface, thus leaving the rest of the cycle with only the slow interface.
  • Page 120 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 7.2.2 Template Configuration Templates allow you to control multiple WAN devices with the same rule. Each WAN device that matches a template will automatically have its own rule created. Click Add to configure a new Template rule.

  • Page 121: Unnels

    Generic Routing Encapsulation (GRE) tunnels can be used to create a connection between two private networks. The IBR600/IBR650 is enabled for either GRE or VPN tunnels. GRE tunnels are simpler to configure and more flexible for different kinds of packet exchanges, but VPN tunnels are much more secure.
  • Page 122 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Page 1: General Tunnel Name: Choose a name that is meaningful to you. Local Network: This is the local side of the “Glue Network,” a network created by the administrator to form the tunnel.
  • Page 123 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Keep Alive: This feature monitors the status of a tunnel. This will more accurately determine if the tunnel is alive or not. Choose the Rate in seconds for each check (Default: 10 seconds. Range: 2 – 3600 seconds) and the number of Retry attempts (Default: 3.

  • Page 124: Unnels

    The IBR600/IBR650 uses IPsec (Internet Protocol security) to authenticate and encrypt packets exchanged across the tunnel. To set up a VPN tunnel with the IBR600/IBR650 on one end, there must be another device (usually a router) that also supports IPsec on the other end.
  • Page 125 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Page 1: General 7.4.1 Tunnel Name: Choose a name meaningful to you. Anonymous Mode: Allow remote connections from any IP address. Local Identity: This can be left blank for most users. If left blank it will default to the IP address of the WAN connection.
  • Page 126 Tunnel Enabled: Enabled or Disabled. MBR1200 Quick Connect: VPN tunnels in the IBR600/IBR650 have more choices than they do in the MBR1200, so it is more complex to configure. Check this box to simplify setup by streamlining your options.
  • Page 127 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT o Ethernet o Wireless As WAN  Serial Number: Select from a dropdown list of attached devices.  MAC Address: Select from a dropdown list of attached devices.  Unique ID: Select from a dropdown list of attached devices.
  • Page 128 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 7.4.2 Page 2: Networks Local Network: The Network IP address and the Subnet Mask define what local devices have access to or can be accessed from the VPN tunnel. The router will automatically fill in the values for your network, but you can change the values to limit the tunnel to only some of the devices in your network.
  • Page 129 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT To set up a tunnel with a remote site, you need to match your tunnel's IKE negotiation parameters with the remote site. By selecting several encryption, hash, and DH group options, you improve your chances for a successful tunnel negotiation.
  • Page 130 In Phase 1, only one DH group can be selected while using Aggressive exchange mode. By default, all the algorithms (encryption, hash, and DH groups) supported by the IBR600/IBR650 are checked, which means they are allowed for any given exchange. Deselect these options to limit which algorithms will be accepted. Be sure to check that the router (or similar device) at the other end of the tunnel has matching algorithms.
  • Page 131 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 7.4.4 Page 4: IKE Phase 2 Perfect Forward Secrecy (PFS): Enabling this feature will require IKE to generate a new set of keys in Phase 2 rather than using the same key generated in Phase 1.
  • Page 132 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 7.4.5 Page 5: Dead Peer Detection Dead Peer Detection (DPD) defines how the router will detect when one end of the IPsec session loses connection while a policy is in use. Connection Idle Time allows you to configure how long the router will allow an IPsec session to be idle before beginning to send Dead Peer Detection (DPD) packets to the peer machine.
  • Page 133 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Page 6: Tunnel Summary 7.4.6 The final page of the tunnel configuration interface is a summary of the tunnel specifications. This is especially helpful for matching this information with the router (or similar device) at the other end of the tunnel.
  • Page 134 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 7.4.7 Global VPN Settings These settings apply to all configured VPN tunnels. Enable Certificate Support: Selecting this will allow you to load a certificate for VPN to the router. Disabling certificate support will no longer use any previously loaded certificate but will not delete it from the router. Only one certificate at a time is supported.
  • Page 135 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Tunnel Connect Retry: Default: 30 seconds. Range: 10-255 seconds. 30 seconds will be sufficient in almost all cases. VPN with NAT-T 7.4.8 If one side of a planned VPN tunnel is behind a NAT (network address translation) firewall, the setup of your tunnel requires the following specifications: 1.

  • Page 136: Wifi As Wan / Bridge (Ibr600)

    WiFi as WAN uses another WiFi network as its Internet source and then rebroadcasts its own local network. For example, the IBR600 can create a private LAN using the public WiFi from a hotel as its WAN. WiFi Bridge functions similarly, but it rebroadcasts the original network.
  • Page 137 When in WiFi Bridge mode with a configured profile, a WiFi Bridge device will be added to the local network interfaces, providing a way to bridge two LANs over a WiFi connection. For example, two separate CradlePoint routers linked through WiFi Bridge mode allows you to have one WiFi-connected network in two separated sections of a large office building.
  • Page 138 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 7.5.2 Saved Profiles This is a list of WiFi networks that have already been configured as WAN sources (or Bridge profiles). The router will attempt to connect to any of these access points using the password you have configured.
  • Page 139 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Click “Refresh” if a WiFi network to which you want to connect is invisible. Site Survey only operates on the 2.4 GHz band. You have the option to manually add network profiles, but it is usually much easier to import them from Site Survey.
  • Page 140 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 7.5.4 Wireless Scan Settings Scan Interval: How often WiFi as WAN scans the environment for updates. (Default: 60 seconds. Range: 5-3600 seconds.) Scan While Connected: Continue to scan for WiFi as WAN profile updates when connected. Each time a scan occurs the wireless communication of the router will be temporarily interrupted.

  • Page 141: Wan Affinity / Load Balancing

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 7.6 WAN Affinity / Load Balancing Load Balance Select the Load Balance Algorithm from the following dropdown options:  Round-Robin: Evenly distribute each session to the available WAN connections.  Rate: Distribute load based on the current upload and download rates. A WAN device's upload and download bandwidth values can be set in Internet →...
  • Page 142 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT DSCP (DiffServ): Differentiated Services Code Point is the successor to TOS (Type of Service). Use this field to select traffic based on the DSCP header in each IP packet. This field is sometimes set by latency sensitive equipment such as VoIP phones.
  • Page 143 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Failover: (Default: Selected.) When this is selected and traffic from the chosen WAN device for this rule is interrupted, the router will fail over to another available WAN device. Deselect this option to restrict this traffic to only the selected WAN interface.
  • Page 144 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT  Spillover: This was the default algorithm in older (version 3) firmware. Load is always given to devices with the most available bandwidth. The estimated bandwidth rate is based on a combination of the upload and download configuration values and the observed capabilities of the device.

  • Page 145: System Settings

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 8 SYSTEM SETTINGS The System Settings tab has 8 submenu options that provide access to tools for broad administrative control of the CradlePoint COR:  Administration  Device Alerts  GPIO Connector ...

  • Page 146: Administration

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 8.1 Administration Select the Administration submenu item in order to control any of the following functions:  Router Security  System Clock  Local Management  Remote Management  GPS  System Logging Router Security 8.1.1...
  • Page 147 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT System Clock 8.1.2 Enabling NTP will tell the router to get its system time from a remote server on the Internet. If you do not enable NTP then the router time will be based on when the router firmware was built, which is guaranteed to be wrong. Whenever the Internet connection is re-established and once a week thereafter the router will ask the server for the current time so it can correct itself.
  • Page 148 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Local Management 8.1.3 Enable Internet Bounce Pages: Bounce pages show up in your web browser when the router is not connected to the Internet. They inform you that you are not connected and try to explain why. If you disable bounce pages then you will just get the usual browser timeout.
  • Page 149  SSH Server Port: Default: 22.  Allow Remote SSH Access: Only enable this option if instructed by a CradlePoint support agent. NOTE: You can restrict remote access to only specified IP addresses in Network Settings → Firewall under Remote Administration Access Control.
  • Page 150 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 8.1.5 If you have an attached device with GPS support, you can enable a graphical view of your router’s location which will appear in Status → GPS. Users can configure GPS NMEA GGA format sentence reporting, available through a router-based server and/or a remote server.
  • Page 151 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT  Include System ID: Include the routers "System ID" sentence with every NMEA message. This can be useful when a single remote client or server is handling NMEA position reports from multiple routers.
  • Page 152 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Latitude 4124.8963, N 41d 24.8963' N or 41d 24' 54" N Longitude 08151.6838, W 81d 51.6838' W or 81d 51' 41" W Fix Quality: - 0 = Invalid Data is from a GPS fix...
  • Page 153 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT a = E or W x = GPS Quality indicator (0=no fix, 1=GPS fix, 2=Dif. GPS fix) xx = number of satellites in use x.x = horizontal dilution of precision x.x = Antenna altitude above mean-sea-level M = units of antenna altitude, meters x.x = Geoidal separation...
  • Page 154 If this occurs, disable this option. Log to attached USB stick: Only enable this option if instructed by a CradlePoint support agent. This will write a very verbose log file to the root level of an attached USB stick. Please disable the feature before removing the USB stick, or you may lose some logging data.
  • Page 155 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Verbose modem logging: Only enable this option if instructed by a CradlePoint support agent. Create support log: This functionality allows for a quick collection of system logging. Create this log file when instructed by a CradlePoint support agent.

  • Page 156: Device Alerts

    SMTP Mail Server 8.2.1 Since the IBR600/IBR650 does not have its own email server, to receive alerts you must enable an SMTP server. This is possible through most email services (Gmail, Yahoo, etc.). Each SMTP server will have different specifications for setup, so you have to look those up separately. The following is an example using Gmail: ©...
  • Page 157 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT  Server Address: smtp.gmail.com  Server Port: 587 (for TLS, or Transport Layer Security port; the IBR600/IBR650 does not support SSL).  Authentication Required: Gmail, mark this checkbox.  User Name: Your full email address ...

  • Page 158: Gpio C

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 8.3 GPIO Connector The power connector includes two pins defined for general purpose LVTTL compatible input and output. These pins are ESD protected and the input is 5V tolerant. NOTE: GPIO functionality requires a separate adapter to connect to the I/O pins.
  • Page 159 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Input Pin – The Input Pin can be used to read a value—either high or low—from an external device and either display that value on this administration page (as the Current Value) or cause the router to reset. Select one of the following options from the dropdown menu: ...

  • Page 160: Hotspot Services (Ibr600)

    Network Settings → WiFi / Local Networks. NOTE: Although any network can be a hotspot, the IBR600 allows only one hotspot. Hotspot Mode: Choose from the following dropdown options: ...
  • Page 161 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Simple Mode Settings 8.4.1 Display: This section allows you to choose if a "Terms of Use" page will be given to the user connecting to the hotspot.  Internal Terms of Use. Fill in your own terms of use.
  • Page 162 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT RADIUS/UAM Settings 8.4.2 This section allows you to configure a RADIUS and Universal Access Method server. After the user accepts the terms, you can either let him/her continue to the URL they were trying to reach or you can force the user to go to a specified UAM Server or URL once before continuing on.
  • Page 163 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT UAM Settings:  Login URL: Assigned by UAM service.  Shared Secret: Optional, depending on the UAM service.  NAS/Gateway ID: Assigned by UAM service. Allowed Hosts Prior to Authentication 8.4.3 Adding host names to this list will allow access from your network to any external domain or website prior to being authenticated.

  • Page 164: Managed Services Ask Your Cradlepoint Sales Representative For Details

    WiPipe Central client will not start unless the WAN is Ethernet. Registration URL: Register your router using the code provided by CradlePoint when you purchase WiPipe Central. SNMP Configuration 8.5.1 SNMP, or Simple Network Management Protocol, is an Internet standard protocol for remote management.
  • Page 165 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT LAN port #: Use the LAN port # field to configure the LAN port number you wish to access SNMP services on. (Default: 161) Enable SNMP on WAN: Enabling SNMP on WAN will make SNMP services available to the WAN interfaces of the router.
  • Page 166 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT  MD5 with DES encryption  SHA with DES encryption  MD5 with AES encryption  SHA with AES encryption Username: Enter the Username configured on your SNMP host in the username field.

  • Page 167: Serial Redirector

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 8.6 Serial Redirector Attach a USB serial device to establish a serial link to a host port on the router. The serial console support allows a USB-to-serial connection to another router or similar device.
  • Page 168 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT  600  1200  1800  2400  4800  9600  19200 Byte Size: The number of bits in a byte. Select from: 5, 6, 7, and 8. Parity: Change this value to enable parity bit checking. Select from the following dropdown options: ...

  • Page 169: System Control

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 8.7 System Control Restore to Factory Defaults: This changes all settings back to their default values. Reboot The Device: This causes the router to restart. Advanced: System Automatic Reboot and Ping Test Scheduled Reboot: This causes the router to restart at a user-determined time.

  • Page 170: System Software

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 8.8 System Software Firmware Upgrade allows the administrator to load new firmware onto the router to add new features or fix defects. If you are happy with the operation of the router, you may not want to upgrade just because a new version is available.

  • Page 171: Glossary

    IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT 9 GLOSSARY 802.11 Alphanumeric A family of specifications for wireless local area networks Characters A-Z and 0-9. (WLANs) developed by a working group of the Institute of Antenna Electrical and Electronics Engineers (IEEE).
  • Page 172 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Authentication Bit rate To provide credentials, like a Password, in order to verify The amount of bits that pass in given amount of time. that the person or device is really who they are claiming Bit/sec to be.
  • Page 173 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT CardBus Data-Link layer A newer version of the PC Card or PCMCIA interface. It The second layer of the OSI model. Controls the supports a 32- bit data path, DMA, and consumes less movement of data on the physical link of a network.
  • Page 174 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Demilitarized zone Download DMZ: A single computer or group of computers that can To send a request from one computer to another and be accessed by both users on the Internet as well as have the file transmitted back to the requesting computer.
  • Page 175 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Encryption Fragmentation Converting data into cyphertext so that it cannot be easily Breaking up data into smaller pieces to make it easier to read. store. Ethernet The most widely used technology for Local Area File Transfer Protocol.
  • Page 176 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Half-duplex IEEE Data cannot be transmitted and received at the same Institute of Electrical and Electronics Engineers. time. IGMP Hashing Internet Group Management Protocol is used to make Transforming a string of characters into a shorter string sure that computers can report their multicast group with a predefined length.
  • Page 177 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Internet Protocol Security Java IPsec provides security at the packet processing layer of A programming language used to create programs and network communication. applets for web pages. Internet Service Provider Kbps An ISP provides access to the Internet to individuals or Kilobits per second.
  • Page 178 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT LPR/LPD MPPE “Line Printer Requestor”/”Line Printer Daemon”. A Microsoft Point-to-Point Encryption is used to secure data TCP/IP protocol for transmitting streams of printer data. transmissions over PPTP connections. MAC Address A unique hardware ID assigned to every Ethernet Maximum Transmission Unit is the largest packet that adapter by the manufacturer.
  • Page 179 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Network Interface Card routers in the network as opposed to sending the entire routing table at a regular interval, which is how RIP NIC. A card installed in a computer or built onto the functions.
  • Page 180 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT channel) but can have multiple ports (logical channels) Rendezvous each identified by a number. Apple’s version of UPnP, which allows for devices on a network to discover each other and be connected without the need to configure any settings.
  • Page 181 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Session key An encryption and decryption key that is generated for Secure Shell is a command line interface that allows for every communication session between two computers. secure connections to remote computers.
  • Page 182 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT TFTP Upload Trivial File Transfer Protocol is a utility used for To send a request from one computer to another and transferring files that is simpler to use than FTP but with have a file transmitted from the requesting computer to less features.
  • Page 183 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Wake on LAN WiFi Protected Access Allows you to power up a computer through it’s Network An updated version of security for wireless networks that Interface Card. provides authentication as well as encryption.
  • Page 184 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT Yagi antenna A directional antenna used to concentrate wireless signals on a specific location. © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 182...

  • Page 185: Appendix

    ALL TIMES (since the device otherwise could transmit signals that might interfere with various onboard systems on such aircraft). Furthermore, under no circumstances should the IBR600/IBR650 device be used by the driver or operator of any vehicle. Such use of the device will detract from the driver or operator’s control of that vehicle. In some jurisdictions, use of the IBR600/IBR650 device while driving or operating a vehicle constitutes a civil and/or criminal offense.
  • Page 186 CradlePoint, Inc. warrants this product against defects in materials and workmanship to the original purchaser (or the first purchaser in the case of resale by an authorized distributor) for a period of one (1) year from the date of shipment. This warranty is limited to a repair or replacement of the product, at CradlePoint’s discretion. CradlePoint does not warrant that the operation of the device will meet your requirements or be error free.
  • Page 187 CRADLEPOINT By activating or using your IBR600/IBR650 device, you agree to be bound by CradlePoint’s Terms of Use, User License and other Legal Policies, all as posted at www.cradlepoint.com/legal. Please read these documents carefully. CradlePoint, the CradlePoint logo, and IBR600/IBR650 are trademarks of CradlePoint, Inc.

  • Page 188: Specifications

    Forwarding, Routing Rules, Route Management, Content ANTENNAS Filtering, Website Filtering, Local DHCP server, DHCP 2 external 2.4 GHz WiFi antennas--500+ feet range (IBR600 only); 2 Client, DNS, DNS Proxy. ALGs: PPTP, L2TP, PPPoE pass- external modem antennas through, IPSec pass-through, FTP (passive), FTP (active),...
  • Page 189 IBR600 | USER MANUAL Firmware ver. 4.0.2 CRADLEPOINT http://www.cradlepoint.com/ Copyright © 2012 by CradlePoint, Inc. All rights reserved. © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 187...

This manual is also suitable for:

Ibr650

Table of Contents

Save PDF