Cradlepoint IBR600 Product Manual page 144

IBR600 | USER MANUAL Firmware ver. 4.0.2
CRADLEPOINT
 Spillover: This was the default algorithm in older (version 3) firmware. Load is always given to devices with the
most available bandwidth. The estimated bandwidth rate is based on a combination of the upload and download
configuration values and the observed capabilities of the device.
 Data Usage: This mode works in concert with the Data Usage feature (Internet → Data Usage). The router will
make a best effort to keep data usage between interfaces at a similar percentage of the assigned data cap in the
Data Usage rule for each interface, rather than distributing sessions based solely on bandwidth. For proper function
you need to create data usage rules for each WAN device you will be load balancing. Make certain to select the
"Use with Load Balancing" checkbox in the Data Usage rule editor.
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 142