Adjustment Of The Side Panels; Adjusting The Armrest Height On Desk Side Panels; Adjustment Of The Standard Side Panel And Clothing Protector - Otto Bock Avantgarde CV Instructions For Use Manual

Adjustments

6.9 Adjustment of the side panels

6.9.1 Adjusting the armrest height on desk side panels

The armrest can be adjusted in height by moving it to various positions without the use of tools.
1) Pull the release lever in the round opening of the side panel downwards (see Fig. 52).
2) Push the armrest to the desired position.
3) Release the release lever. The armrest engages automatically.

6.9.2 Adjustment of the Standard Side Panel and Clothing Protector

If the rear wheel position is changed, fine adjustment of the side panels is necessary. The clothing protector (see
Fig. 53) can be adjusted continuously to the position of the rear wheels.
1) Remove the rear wheel.
2) Loosen the mounting screw between the side panel and side block (see Fig. 54, items 1/2).
3) Loosen the bolt in the adjustment groove of the backrest tube from the inside (see Fig. 55).
4) If necessary, slightly loosen the slide block on the bottom of the frame (see Fig. 56).
5) Unscrew and remove the cover from the adjustment disc (see Fig. 57).
6) Push on the rear wheel to determine the position.
7) Adjust the position:
→ Front: align the correct hole on the adjustment disc with the mounting point on the slide block (see Fig. 58,
item 1).
→ Rear: Adjust the angle (see Fig. 55).
→ Slide block: if necessary, adjust the depth position (see Fig. 58, item 2).
8) Screw on the cover of the adjustment disc (see Fig. 57). The marks on the disc help to find the position.
Ensure that the side panel can be fastened to the slide block through the cover (see Fig. 58, item 3).
9) Securely retighten all the screws.
10) Push on the rear wheel and ensure that it can rotate freely.
→ After adjustment of both side panels, both rear wheels must rotate freely without scraping noises.
24 | Ottobock
51
53
52
54
Avantgarde CV/CS/CLT