Manitowoc QuietQube SD0672C Technician's Handbook page 60

Suction Shut-off Valve Insulation
The preformed suction shut-off valve insulation is
located in the plastic bag taped to the water curtain.
TIGHTEN VALVE CAPS
TO SPECIFICATIONS.
A. Verify valve and schrader caps are tightened
to specifications (see step 6).
B. Place insulation over schrader valve cap and
left side of valve. Position the tab between
the mounting bracket and rear panel.
C. Fold insulation and hold against right hand
side of valve while securing with electrical
tape. Seal the line set insulation to the shut-
off valve insulation with electrical tape.
60
PREFORMED
INSULATION
PLACE TAB BETWEEN
VALVE BODY AND PANEL.
FOLD INSULATION OVER
RIGHT SIDE OF VALVE
AND SECURE WITH
ELECTRICAL TAPE.
Part Number 80-1505-3 6/11