Potential Personal Injury Situation
The ice machine head section contains the
refrigerant charge. Installation and brazing of the line
sets must be performed by a properly trained and
EPA certified refrigeration technician aware of the
dangers of dealing with refrigerant charged
equipment.
CVD® CONDENSING UNIT
Each condensing unit ships from the factory
pressurized with 50/50 nitrogen helium mixture that
must be removed during the installation process
(approximately 20 psig).
REFRIGERATION LINE SETS/TRAP KIT
Refrigeration Rated Tubing and Trap Kits are shipped
capped with atmospheric pressure.
Installation of a QuietQube® Condensing Unit may
require the use of special equipment for placement.
Trained and qualified personnel are required for
proper rigging and lifting.
Part Number 80-1505-3 6/11
Warning
!
Warning
!
43