Snmp Community - Planet FGSW-2840 User Manual

4.9.1.5 SNMP Community

The SNMP v1 and SNMP v2c adopt community name authentication, the community name can limit access to the SNMP agent
from SNMP network management station, functioning as a password. If SNMP v1 or SNMP v2c is employed, it can directly
configure the SNMP Community on this page without configuring SNMP Group and User; the screen in
The page includes the following fields:
Object
Community Config
 Community Name
 Access
 MIB View
Community Table
 Select
 Community Name
 Access
 MIB View
 Operation
Figure 4-9-7: SNMP Community Page Screenshot
Description
Enter the Community Name here.
Defines the access rights of the community.
 read-only: Management right of the Community is restricted to read-only, and
changes cannot be made to the corresponding View.
 read-write: Management right of the Community is read-write and changes can
be made to the corresponding View.
Select the MIB View for the community to access.
Select the desired entry to delete the corresponding Community. It is multi-optional.
Displays the Community Name here.
Displays the right of the Community to access the View.
Displays the Views which the Community can access.
Click the Edit button to modify the MIB View and the Access right of the Community,
and then click the Modify button to apply.
206
User's Manual of FGSW-2840 / FGSW-4840S
Figure 4-9-7 appears.