Snmp Group - Planet FGSW-2840 User Manual

4.9.1.3 SNMP Group

This page provide configure SNMP Group to control the network access by providing the users in various groups with different
management rights via the Read View, Write View and Notify View; the screen in
The page includes the following fields:
Object
Group Config
 Group Name
 Security Model
 Security Level
Figure 4-9-5: SNMP Group Page Screenshot
Description
Enter the SNMP Group name. The Group Name, Security Model and Security Level
compose the identifier of the SNMP Group. The Groups with these three items the
same are considered to be the same.
Select the Security Model for the SNMP Group.
 v1: SNMPv1 is defined for the group. In this model, the Community Name
is used for authentication. SNMP v1 can be configured on the SNMP
Community page directly.
 v2c: SNMPv2c is defined for the group. In this model, the Community
Name is used for authentication. SNMP v2c can be configured on the
SNMP Community page directly.
 v3: SNMPv3 is defined for the group. In this model, the USM mechanism
is used for authentication. If SNMPv3 is enabled, the Security Level
field is enabled for configuration.
Select the Security Level for the SNMP v3 Group.
 noAuthNoPriv: No authentication and no privacy security level is used.
202
User's Manual of FGSW-2840 / FGSW-4840S
Figure 4-9-5 appears.