Snmp Support; Snmp Community - Planet GRT-101 User Manual

PLANET Technology Corp.
admin# admin security ip_pool clear 1
To save your changes, enter:
admin# write
Note: GRT-101 comes pre-configured without any constraint on the legal access IP addresses of Telnet clients and
web browsers for convenience. However, it is very important to setup management security to prevent invalid access
to GRT-101 from Internet.

3.16 SNMP Support

In addition to managing GRT-101 by means of the command-line applications
and web browsers, you can manage the unit by using a simple network man-
agement protocol (SNMP) management station. GRT-101 can generate
SNMP traps to indicate alarm conditions, and it relies on SNMP community
strings to implement SNMP security. Currently, SNMP (RFC 1157) and
SNMPv2c (RFC 1901) agents are implemented. Also, the management in-
formation bases (MIBs) supported by GRT-101 include MIB II right now.

3.16.1 SNMP community

The below example adds GRT-101 into a SNMP community "private", with
read/write access right for SNMP managers in the same community.
admin# admin snmp community 1 edit enable private read_write
To show the setting of SNMP communities with access right, type:
admin# admin snmp community 1 list
SNMP Community Pool
No Community
---- -------------------------------- ------------------
1
2
3
4
5
To disable the SNMP community 1, enter the following command:
admin# admin snmp community 1 edit disable private read_write
To save your changes, enter:
Access Right
private Read_Write
(Empty)
(Empty)
(Empty)
(Empty)
- - 61
GRT-101 User's Manual