Global Config Mode Commands; Access-List Command; Contact-Info Command; Enable Command - Planet FGSW-2840 User Manual

6.3 Global Config Mode Commands

6.3.1 access-list Command

Description:
Add an access list entry
Syntax:
access-list create access-list-num
access-list extended acl-id rule rule-id { deny | permit } [[ sip source-ip ] smask source-ip-mask ] [[ dip destination-ip] dmask
destination-ip-mask ] [ s-port s-port ] [ d-port d-port ] [ protocol protocol ]
no access-list extended acl-id rule rule-id
access-list policy action policy-name acl-id
no access-list policy action policy-name acl-id
access-list policy name name
no access-list policy name name
access-list standard acl-id rule rule-id {
dmask destination-ip-mask ]
no access-list standard acl-id rule rule-id

6.3.2 Contact-info Command

Description:
The contact-info command is used to configure the system contact information. To clear the system contact information,
please use no contact-info command
Syntax:
contact-info contact_info
no contact-info

6.3.3 enable Command

Description:
Configure enable password
Syntax:
enable password - Assign the privileged level password
| } [[ sip source-ip ] smask source-ip-mask] [[ dip destination-ip ]
deny permit
245
User's Manual of FGSW-2840 / FGSW-4840S